Synopsys 640-pin Generic Device Adapter manual Preface, About This Application Note

Page 5

The ModelSource 640-pin Adapter

Preface

Preface

About This Application Note

This application note describes the features and use of the ModelSource640-pin Generic Device Adapter (hereafter referred to as the “Adapter”), which allows you to model a 640-pin device using ModelSource modeling systems.

This application note assumes that you are familiar with model-building procedures as described in these Synopsys documents:

Logic Model Development Manual

Shell Software Reference Manual

ModelSource User’s Manual

LM-family Modeler Manual

Related Documents

To see a complete listing, refer to the Guide to Hardware Modeling Documents.

Manual Overview

This manual contains the following chapters and appendixes:

Preface

Describes the application note and lists the

 

typographical conventions and symbols used in it; tells

 

how to get technical assistance.

Chapter 1

Describes the hardware and software needed to create a

Describing a 640-pin Logic

Logic Model using the 640-pin Generic Device Adapter.

Model

 

November 2001

Synopsys, Inc.

5

Image 5
Contents Using the ModelSource Pin Generic Device Adapter ModelSource 640-pin Adapter Contents Appendix a J1-J6 Connector Pinouts About This Application Note PrefaceTypographical and Symbol Conventions Pin1 pin2 ... pinN Getting HelpDoc@synopsys.com Comments?Hardware Requirements Describing a 640-pin Logic ModelProcedural Summary Software RequirementsDaughterboard Description Building the Daughterboard640-pin Adapter Daughterboard Connectors J1 and J3 Connector Pin DetailConnector Pin Detail, Shown from Component Side Parts ListShows a drawing of the short and long board stiffeners RequirementsJ1-D17 Keepalive Routing GuidelinesADJVCC1 P5VADJVCC2 M5VPage Adapter Description Connecting the Daughterboard640-pin Generic Device Adapter Procedures Page Files Provided by Synopsys Developing the Shell SoftwareUser-Generated Files Partial GEN640.PKG File Mounting the Adapter onto the ModelSource Modeling Systems Completing the ModelVerifying the Model Labeling the DaughterboardUnmounting the Adapter from the ModelSource Modeling Systems Page Trigger J1-J6 Connector PinoutsSEAT1 Play SampleTemp Pinouts for Connectors J1-J6 DUT13 DUT11DUT10 DUT9DUT37 DUT38DUT36 DUT42DUT54 DUT55DUT53 DUT12DUT35 DUT41DUT43 DUT44SEAT2 DUT80Pinouts for Connectors J1-J6 DUT93 DUT91DUT90 DUT89DUT94 DUT92DUT95 DUT96FP7 FP6FP8 SEAT3DUT640 Reserved AD7 Reserved AD13Reserved AD5 Reserved AD0DUT615 Reserved AD12 Reserved AD11Reserved AD6 Reserved AD2Reserved AD10 Reserved AD3 Reserved AD9Reserved AD4 Reserved -RDReserved AD1 Reserved AD14Reserved AD8 SEAT4 Reserved AD15Reserved -AS DUT553 Pinouts for Connectors J1-J6 Pinouts for Connectors J1-J6 SEAT4 DUT400 Pinouts for Connectors J1-J6 Pinouts for Connectors J1-J6 Pinouts for Connectors J1-J6 SEAT5 FP1 Reserved FP2 FP3 FP4 FP5 FP6 FP7 FP8 SEAT6 Pinouts for Connectors J1-J6 Pinouts for Connectors J1-J6 Pinouts for Connectors J1-J6 F20 DUT285 F21 DUT286 F22 F23 F24 FP5 Reserved FP6 FP7 FP8