Synopsys 640-pin Generic Device Adapter manual Developing the Shell Software, User-Generated Files

Page 23

The ModelSource 640-pin Adapter

Chapter 4: Developing the Shell Software

4

Developing the Shell Software

The Shell Software file requirements for a 640-pin Logic model are similar to those for standard Logic Models, and are summarized here. For more information, see the Shell Software Reference Manual.

User-Generated Files

As for all Generic Device Adapters, you must create one or more Shell Software files that contain DUT-specific information, such as pinouts, device names, propagation delays, timing checks.

Files Provided by Synopsys

The Adapter Mapping (.ADP) file, GEN640.ADP: This file provides signal mapping between the Adapter and the ModelSource modeling system. You should be able to use this file without modification.

A template Package Mapping (.PKG) file, GEN640.PKG: The .PKG file provides signal mapping between the Daughterboard and the DUT; the template file contains Daughterboard pin names mapped to duplicate pin names, for those pins used for DUT signals. You create the custom .PKG file by editing the template and replacing the duplicate pin names with your DUT pin names.

November 2001

Synopsys, Inc.

23

Image 23
Contents Using the ModelSource Pin Generic Device Adapter ModelSource 640-pin Adapter Contents Appendix a J1-J6 Connector Pinouts About This Application Note PrefaceTypographical and Symbol Conventions Pin1 pin2 ... pinN Getting HelpDoc@synopsys.com Comments?Hardware Requirements Describing a 640-pin Logic ModelProcedural Summary Software RequirementsDaughterboard Description Building the Daughterboard640-pin Adapter Daughterboard Connectors J1 and J3 Connector Pin DetailConnector Pin Detail, Shown from Component Side Parts ListShows a drawing of the short and long board stiffeners RequirementsJ1-D17 Keepalive Routing GuidelinesM5V P5VADJVCC1 ADJVCC2Page Adapter Description Connecting the Daughterboard640-pin Generic Device Adapter Procedures Page Files Provided by Synopsys Developing the Shell SoftwareUser-Generated Files Partial GEN640.PKG File Mounting the Adapter onto the ModelSource Modeling Systems Completing the ModelVerifying the Model Labeling the DaughterboardUnmounting the Adapter from the ModelSource Modeling Systems Page Trigger J1-J6 Connector PinoutsSEAT1 Play SampleTemp Pinouts for Connectors J1-J6 DUT9 DUT11DUT13 DUT10DUT42 DUT38DUT37 DUT36DUT12 DUT55DUT54 DUT53DUT44 DUT41DUT35 DUT43SEAT2 DUT80Pinouts for Connectors J1-J6 DUT89 DUT91DUT93 DUT90DUT96 DUT92DUT94 DUT95SEAT3 FP6FP7 FP8DUT640 Reserved AD0 Reserved AD13Reserved AD7 Reserved AD5DUT615 Reserved AD2 Reserved AD11Reserved AD12 Reserved AD6Reserved AD10 Reserved -RD Reserved AD9Reserved AD3 Reserved AD4Reserved AD1 Reserved AD14Reserved AD8 SEAT4 Reserved AD15Reserved -AS DUT553 Pinouts for Connectors J1-J6 Pinouts for Connectors J1-J6 SEAT4 DUT400 Pinouts for Connectors J1-J6 Pinouts for Connectors J1-J6 Pinouts for Connectors J1-J6 SEAT5 FP1 Reserved FP2 FP3 FP4 FP5 FP6 FP7 FP8 SEAT6 Pinouts for Connectors J1-J6 Pinouts for Connectors J1-J6 Pinouts for Connectors J1-J6 F20 DUT285 F21 DUT286 F22 F23 F24 FP5 Reserved FP6 FP7 FP8