
Electrical connection and cable entry
!
For installation, please observe the instructions in the "Setup" leaflet!
– DC – DC +DC +DC
If the solar inverter is fixed to the installa- tion frame, the electrical connection can be led through. The unit may only be ope- ned by a qualified electrician. The cabinet cover must first be released and removed.
The following cable inlets are located on the underside:
RS 232, RS 485, |
|
Irradiation sensor with inte- |
|
grated temperature sensor | AC wiring loom |
cable | L1, L2, L3, N, PE |
Fig.: Inlets on the unit underside | 94 |