Sunway NT 6000, NT 2600, NT 4000 user manual Data memory

Data memory

Your solar inverter is equipped with an internal data memory as standard. This data memory provides you with a detailed view of the mode of functioning and the relevant values of your solar power supply at all times. You can access these data with the help of the NT Monitor software described below. The following measured values can be determined:

·DC voltage

·AC voltage and AC current (power calcu- lation)

·Irradiation and module temperature (if a sensor is connected)

·Time and date

The following values can be accumulated, stored and successively overwritten:

·15 minute values for AC current, DC and AC voltages, irradiation and temperature

·120 times storage of 15-minute average values in the recirculating storage; storage depth: three days on average, then overwriting of values

·Storage of accumulated daily work in Wh and of 40 daily values in the recircu- lating storage and successive overwriting of values

·Storage of accumulated monthly work in kWh and of 13 monthly values in the recirculating storage, then overwriting of values

·Storage of faults with max. ten values, then successive overwriting of values

Please note that all displayed performance data are displayed with a nominal measu- ring accuracy of maximum 5 %. The energy counter of your EVU should be used as absolute reference for the fed-in energy.

112