Operation of Sunways NT Monitor
After installing the Sunways NT Monitor software on your PC, you can start the program. The word «Sunways» will now appear on your screen.
On the menu bar at the top, you will see the four menu areas «Program», «Data», «Settings» and «Help».
· Setting menu
To configure your solar inverter, open the «Settings» menu by clicking on it with the mouse, and click on the «Inverter» key. Enter the address number that you have defined for your solar inverter next to «Inverter». For example, the number «1» for one solar inverter. In the case of several units, select «all».
Then enter the desired date and time. The settings are transferred to the solar inver- ter by clicking on the «Make change» key.
If you are using several solar inverters and wish to make a change to the numbering,
123 you can enter the old number of the
solar inverter in the top section of the right window half and the new number beneath it. The numbering is changed by clicking on the «Make change» key.
Exit the window with the «Close» key. You will go back to the «Setting» menu.
You can set the interface configuration with your PC by clicking on the «Connec-
tion» key. | EN |
By clicking on the «Remote modem» |
|
key, you can configure an optional modem |
|
(e. g. if you wish to retrieve data by |
|
remote inquiry). |
|
· Data menu |
|
In the «Data» menu, you can call up |
|
the current accumulated performance and |
|
energy of the solar inverter by clicking |
|
on the «Online» key. |
|
You can display the data measured at |
|
15 minute intervals by clicking on the |
|
«Minute values» key. The data and values |
|
are graphically visualised by clicking on |
|
the «Graphic representation» key. |
|