SOYO 6KB82440 manual Pci/Vga, Dram 64MB

Page 27

BIOS Setup

23

PCI/VGA	Enabled:	The color of the monitor may be incorrect
Palette Snoop		if uses with MPEG card. Enable this
		option to make the monitor normal.
	Disabled:	Default setting.
OS Select for	OS2:	Choosing this when you are using OS/2
DRAM >64MB		operation system.
	Non-OS/2: Choosing this when you are using no-
		OS/2 operation system.
Video or	BIOS shadow copies BIOS code from slower ROM
Adapter BIOS	to faster RAM. BIOS can then execute from RAM.
Shadow	These 16K segments can be shadowed from ROM to
	RAM. BIOS is shadowed in a 16K segment if it is
	enabled and it has BIOS present.

3.After you have finished with the BIOS Features Setup program, press the <ESC> key and follow the screen instructions to save or disregard your settings.

Image 27

Contents LX PCI Mainboard User’s Guide Technical Reference 6KBDisclaimer About This GuideCopyright Notice TrademarksTable of Contents Drivers Installation Guide Dimm Key FeaturesUnpacking the Mainboard Electrostatic Discharge PrecautionsÐ1. Mainboard Layout Mainboard Layout w/ Default SettingsOverheating and ensure system stability JP5 Cmos Clear Jumper JumpersSW1 Bus Fraction Core/Bus Ratio Select Jumper CPU Type ConfigurationHardware Setup Memory ConfigurationMulti I/O Port Addresses ConnectorsATX PW ATX Power Supply Connectors PS/2 Keyboard ConnectorSPK Speaker Connector PS/2 Mouse ConnectorIR IR Connector Keylock & Power LED ConnectorFDC Connector IDE1/IDE2 On-board Primary/Secondary IDE HDD ConnectorsCOM1/COM2 Connectors IDE LED IDE HDD LED ConnectorsJP44 Wake-On-LAN WOL Header FAN CPU Cooling Fan ConnectorStep Slot 1 Installation GuideATX PW ATX PW Step Non-boxed Pentium Golden Finger Top View of CPU Support Clip Bios Setup Standard Cmos Setup Floppy 3 Mode SupportHalt On Bios Features Setup Swap Floppy Boot SequenceBoot Up Num SettingDram 64MB PCI/VGAMA Wait State Chipset Features SetupAuto Configuration DelayCPU-TO-PCI IDE Sdram RAS-to-CAS Delay Sdram RAS PrechargeTemperature Temperature System Temp and CPU FAN1 Speed VcorePower Management Setup APM PNP/PCI Configuration Setup INT# Load Setup DefaultsPCI IRQ PCI IDE IRQECP/EPP Load Bios DefaultsROM PCI/ISA Bios Integrated Peripherals Award SOFTWARE, INC Integrated PeripheralsPCI Slot IDE 2nd Channel Uart 2 ModePIO IDE Secondary SlaveParallel Port EPP Type Onboard Printer ModeECP Mode Use DMA Onboard Parallel PortSupervisor Password ÒEnter PasswordÓÒConfirm PasswordÓ User Password ROM PCI/ISA Bios Cmos Setup Utility IDE HDD Auto DetectionHard Disks Drivers Installation Guide Windows Cd /inst Tar xvf /tmp/trisco.tar Drivers Installation GuideOS/2 2.0 and Warp InstallMotherboard Layout CPU Jumper SettingsDefault I/O Settings Connectors and Jumper Settings