SOYO 6KB82440 manual OS/2 2.0 and Warp, Install

40 Drivers Installation Guide

4)From root directory, type the following commands: mkdir/inst

cd /inst

tar xvf /tmp/trisco.tar.

(Note: there is a period at the end of the last command.)

5)Install the driver by typing:

./install

6)Reboot your SCO UNIX system..

OS/2 2.0 and WARP 3.X

1)Copy TRIOS2.ADD from the floppy diskette to your hard disk under the OS2 directory (i.e., C:\OS2).

2)Edit C:\CONFIG.SYS to replace BASEDEV=IBM1S506.ADD with BASEDEV=TRIOS2.ADD

3)Reboot the system.

Note: For more information (like parameter settings, driver de-

installation, etc.), please refer to the README.TXT file on the

diskette.