SOYO 6KB82440 manual Unpacking the Mainboard, Electrostatic Discharge Precautions

2 Introduction

Unpacking the Mainboard

The mainboard package contains:

¥The 82440LX Mainboard

¥This User's Guide

¥One Triones IDE Bus Master Drivers Diskette

Note: Do not unpack the mainboard until you are ready to install it.

Follow the precautions below while unpacking the mainboard.

1.Before handling the mainboard, ground yourself by grasping an unpainted portion of the systemÕs metal chassis.

2.Remove the mainboard from its anti-static packaging and place it on a grounded surface, component side up.

3.Check the mainboard for damage. If any chip appears loose, press carefully to seat it firmly in its socket.

Do not apply power if the mainboard appears damaged. If there is damage to the board contact your dealer immediately.

Electrostatic Discharge Precautions

Make sure you ground yourself before handling the mainboard or other system components. Electrostatic discharge can easily damage the components. Note that you must take special precaution when handling the mainboard in dry or air-conditioned environments.

Take these precautions to protect your equipment from electrostatic discharge:

¥Do not remove the anti-static packaging until you are ready to install the mainboard and other system components.

¥Ground yourself before removing any system component from its protective anti-static packaging. To ground yourself grasp the expansion slot covers or other unpainted portions of the computer chassis.

¥Frequently ground yourself while working, or use a grounding strap.

¥Handle the mainboard by the edges and avoid touching its components.