SOYO 6KB82440 manual Apm

28 BIOS Setup

PM Control by	Choose Yes or No (default). APM stands for
APM	Advanced Power Management. To use APM,
	you must run Òpower.exeÓ under DOS v6.0 or
	later version.
Video Off Method	Choose V/H Sync+Blank (default), Blank
	screen, or DPMS for the selected PM mode.
Doze Mode	When the set time has elapsed, the BIOS sends a
	command to the system to enter doze mode
	(system clock drops to 33MHz). Time is
	adjustable from 1 Min to 1 Hour.
Standby Mode	The default is Disabled. Time is adjustable from
	1 Min to 1 Hour.
Suspend Mode	The default is Disabled. Only an SL-Enhanced
	(or SMI) CPU can enter this mode. Time is
	adjustable from 1 Min to 1 Hour. Under Suspend
	mode, the CPU stops completely (no instructions
	are executed.)
HDD Power Down	When the set time has elapsed, the BIOS sends a
	command to the HDD to power down, which
	turns off the motor. Time is adjustable from 1 to
	15 minutes. The default setting is Disabled.
	Some older model HDDs may not support this
	advanced function.
IRQx (Wake-Up	The BIOS monitors these items for activity. If
Events)	activity occurs from the Enabled item the system
	wakes up.
Power Down	The BIOS monitors these items for no activity. If
Activities	no activity occurs from the Enabled item the
	system will enter power saving mode
	(Doze/Standby/Suspend/ HDD Power Down
	mode) .

3.After you have finished with the Power Management Setup, press the <ESC> key to return to the Main Menu.