Tascam IF-FW, IF-DM owner manual Mixer Control Screen, Cursor Navigation

Mixer Control Screen

On both the DM-3200 and DM-4800, the IF-FW/DM MKII presents a detailed setup and status display screen as shown below. Navigate to the Digital page (LCD access button 2 with blue ALT LED lit), and then select the SLOT tab (labeled SLOT 1-2or SLOT 3-4on the DM-4800)

Cursor Navigation:

Use the 4 arrow keys to the right of the LCD screen to move the cursor over to the FW MKII Card area. It will always be on the left because it only works in Slot 1 (and also Slot 3 for the DM-4800).

Use the ENTER key to make changes. The JOG/DATA dial can also be used to move the cursor up/down.

This display has the following:

•CARD Status: This shows whether the IF-FW/ MKII card itself is working correctly.

•1394 Status: This shows what state the FireWire bus is in.

•Input configuration: Selects the number of channels from the computer to the mixer.

•Output configuration: Selects the number of channels from the mixer to the computer.

•Version Information: This tells you what version of the IF-FW/DM MKII software is currently being used.

15