Tascam IF-FW, IF-DM owner manual Mixer Inputs, DM-4800

DM-4800

By default, the DM-4800 puts busses 1-24 on IF-FW/DM MKII outputs 1-24 and duplicates busses 1 – 8 on outputs 25-32.

These routing settings can be changed in the OUTPUT SLOT tab of the DM-4800’s ROUTING screen.

Routing control is identical to the DM-3200 described above.

Mixer Inputs

DM-3200

The IF-FW/DM MKII’s mixer inputs are configured from the INPUT tab of the mixer’s ROUTING screen.

(Note) By default, there are no option card signals routed into the mixer.

Routing Control Use POD 3 to select a page of inputs, use the arrow keys to navigate around the inputs. Use the jog/dial to select an input and press ENTER to confirm it. Use POD 4 to choose a sub-set of the available inputs.

Use the Batch routing area at the bottom of the screen to route blocks of 8 at a time for speed. Don’t forget to press ENTER.

27