IF-FW/DM Mkii DAW Setup, Windows WDM, Output

Output

This allows restricting the number of channels being sent to the computer to 16 for reduced host load, or setting the full channel count of 32. Especially at high sampling rates, if you don’t need the full 32 channel count from the mixer to the computer for your project, you will get better performance from your computer by setting this to 16.

(Note) Before changing this setting, be sure that no audio applications are running, and no sound is being played back through the IF-FW/DM MKII. After changing the setting, wait a few seconds for the driver and OS to reconfigure to the new setting before re-launching your audio application.

Version Information

This tells you what version of the IF-FW/DM MKII software is currently being used. Updates may be made available through the TASCAM web site at www.tascam.com

IF-FW/DM MKII DAW Setup

Below are instructions for setting up common DAW software applications to use the IF-FW/DM MKII interface. If your app isn’t covered here, but does support ASIO on PC or Core Audio on the Mac, or if you need more detailed instructions to configure your app, please refer to the documentation for your app to set up an audio/MIDI interface.

Windows - WDM

WDM is the standard Windows driver interface, and provides Audio and MIDI services to the OS and all applications that support WDM.