Tascam IF-FW, IF-DM owner manual Digital Performer

Digital Performer

The following instructions are for Digital Performer 5.1

1.Under the Setup menu, select Configure Audio System Æ Configure Hardware Driver

2.Highlight “IF-FW/DM mkII” in the list to make it the selected Core Audio device for DP.

3.If the IF-FW/DM MKII is not in the list, it is not being detected by your Mac, go to the troubleshooting section.

4.The Master Device and Clock Modes menu items will be fixed to “IF-FW/DM mkII”

5.The Sample Rate menu item will be fixed to the current sample rate of the connected mixer.

6.Configure the Buffer Size and Host Buffer Multiplier according to your Mac’s capabilities. Generally, less powerful Macs will require higher settings.

7.Leave the Work Priority setting at “High”.

8.Click OK

23