Tascam IF-FW, IF-DM owner manual Mac, Status Panel

Mac

The IF-FW/DM MKII Control Panel is found under the Applications folder. Double click to launch it.

It can also be reached through the Audio MIDI Setup utility by pressing the “Configure Device” button when the IF-FW/DM MKII is selected in the “Properties For:” pull-down.

On the Left hand side is the Status panel, and on the Right hand side is the Configuration panel.

Status Panel

The following information is shown:

•Status – This is the Firewire status, Not Ready, Locked or Unlocked. If the FireWire cable is not connected, or the mixer is not ON, then the Status panel shows “No Device Found” here, and the rest of this panel and the Configuration panel will be blank

•Sample Rate – The Sampling Frequency that the mixer is currently running at.

•Channel count – How many channels are currently being streamed to and from the mixer. This can be changed only from the mixer’s LCD screen. (Note): The numbers here are relative to the computer. If the Status is Unlocked, additional information is displayed here about the state of

33