Tandberg Data T40 manual

Page 18

To unpack the StorageLibrary, follow the instructions below.

1.Carefully unpack the unit from the shipping container. Save the container and packing materials in case you need to transport the StorageLibrary in the future. The packaging is specifically designed for the library to ensure it is not damaged during transportation.

2.The StorageLibrary could be lifted by one person if drives, power supply, and magazines are removed. However, for absolute safety, it is recommended that two people lift the StorageLibrary. Full library weight = 38 kg / 84 lbs (2 FH drives). Empty library weight = 23.6 kg / 52 lbs (does not include drives, magazines or power supply).

3.Review the contents of the shipping container to be sure that all parts were included in the shipment and no parts are damaged. A standard package for the StorageLibrary consists of the following items:

A factory-assembled StorageLibrary unit containing four cartridge magazines

A standard accessory kit containing:

Printed copy of the Quick Start Guide

1 Warranty/Registration Information

Rack mounting kit including rack mount ears

2 power cords: one for USA/Japan and one for European power outlets

1 Ethernet cable

Media barcode label kit (contains media labels and cleaning cartridge labels)

There will be variations of this list. Depending on the number of drives in your library and whether or not your library is equipped with SCSI or FC drives, the accessory kit may contain a terminator and SCSI cable.

The StorageLibrary accessory kit contains no cartridges.

4.Complete product registration online at http://www.tandbergdata.com, Support, Register Your Product.

10

Unpacking the StorageLibrary

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Installation and User Guide Copyright 2006 Tandberg Data ASA Table of Contents Information about the Operator Interfaces Updating Firmware Approved Drive Types Figures Tables Waste Electrical and Electronic Equipment Directive Explanation of Symbols and NotesAbout This Guide Product Model NumberOther Documents You Might Need Getting More Information or HelpProduct Overview Product DescriptionTape Drive Support Data Transfer Rates MagazinesFront Panel Rear Panel LED IndicatorsStandby Switch Control ButtonsLibrary Features Operator InterfacesADI Bridging and LUN Station PartitionsControl Path Simple Network Management Protocol SnmpBrowser Requirements Unpacking the StorageLibrary Finding a Location for the StorageLibraryUnpack Page Installing the Library Remove the Transport Locking ScrewsMounting the StorageLibrary in a Rack Mounting the Rack mount Ears Rack mounting Kit with Rack mount Ears Right figureInstalling the Rails in a Rack Installing the Left Rail AssemblyInstalling the Right Rail Assembly Mounting the StorageLibrary to the Rack StepInstalling the Library Connecting Library Cables ScsiConnecting Library Cables Fibre Channel Guidelines for Connecting the Scsi CablesConnecting the Cables System Power-on Labeling Cartridges for the Barcode Reader Page Information about the Operator Interfaces Front Panel Interface FPIScroll Function Remote Management Interface Menu TreesPage Network Operations Assign Media Import Media Setup Setup WizardTools Prepare to Ship Restore Default Reports LibraryReports Network Operations Export Media Setup SlotsDrive FW Upgrade System Test Cycle test Reset Web Password License Key RAS Tickets StatisticsPage Diagnostics Operations Assign Media Setup Setup WizardTools Maintenance Import Media NetworkRAS Tickets Statistics License Key Notification Web Password Reports NetworkHome Screen ToolsOperator Privileges RMI Home ScreenWords Commonly Used on the FPI and RMI Symbol on FPI DescriptionSymbol Description WordMap Menu Status Page Configuring the Library About the Setup WizardUsing the Default Administrative User Account Administrator Using the Setup Wizard Setup Wizard TasksConfiguring Network Settings Remote Access Applying a License KeyConfiguring I/E Slots Configuring Cleaning SlotsFrom the FPI, select Setup Activate License Configuring Partitions From the RMI, select Setup Partition/DriveCreating Partitions Reconfigure Partitions Changing Partition ModesSetting Drive ID Modifying the Control PathConfiguring Autoclean Configuring FPI PasswordSetting Date and Time Configuring RMI PasswordConfiguring Menu Timeout Configuring Barcode ScanConfiguring Audible Alarm Configuring SnmpConfiguring E-mail Notification Page Logging Out Running the LibraryLogging Importing CartridgesImporting Cartridges via I/E Slot Unloading from Tape Drives Exporting CartridgesLoading to Tape Drives Import Cartridges via Bulk Loading of MagazinesCleaning Media Handling Cleaning Tape DrivesImporting Cleaning Media Exporting Cleaning MediaMagazine Handling Manual CleanTaking the Library Online/Offline Taking a Library OnlineRemoving the Magazine from the Unit Inserting Cartridges into the MagazineRemoving Cartridges from the Magazine Inserting a Magazine into the Unit Manual/Emergency Release of MagazinesStandby Functionality Viewing Library Settings Viewing Partitions/Drive SettingsGetting Status and Information Viewing Network Settings Viewing StatisticsViewing Log Page Adding, Removing and Replacing Power Supply UnitRemoving and Replacing a Power Supply Required tools NoneTape Drive Unit Adding a Tape DriveRequired tools Screwdriver Permanently Removing a Tape Drive Removing and Replacing a Tape DrivePage Updating Firmware Updating Library FirmwareFrom the RMI, select Tools Drive Settings Updating Drive FirmwareFrom the FPI, select Tools Drive Settings Page Working With Cartridges and Barcodes Handling Cartridges ProperlyInstalling Barcode Labels Write-Protecting CartridgesBarcode Requirements Troubleshooting About RAS TicketsViewing RAS Tickets Supported RAS Tickets Parameters and Priority Closing RAS TicketsSupported RAS Tickets Display Message Description Ticket Suggested ActionDisplay Message Interpreting LEDs Verifying Hardware Maintenance MenusDiagnostics Menu Item nameTroubleshooting Matrix Software CheckingVerifying Recent Changes Problem Power Solution Problem Cartridge Movement Problem Media Problem Scsi problemsProblem Library Performance Problem CleaningProblem Write or Read Issues Problem LED Error MessagesProblem Solution Errors Displayed on Front Panel Problem Remote Management Problem Forgot PasswordShipping or Transporting StorageLibrary Reinserting the Transport Locking ScrewsPacking the StorageLibrary Transport Locking Screws Marked with Red Plastic TabSpecifications T40 Library 4U control moduleDimensions Library DimensionsLibrary Component Weights WeightPower Requirements Climatic SpecificationsPage EMC Approvals Safety and Regulatory InformationSafety Approvals EuropeCanada Conformity DeclarationsJapan Australia/New ZealandApproved Drive Types
Related manuals
Manual 5 pages 53.87 Kb

T40 specifications

Tandberg Data T40 represents a significant advancement in data storage technology, offering users a robust and reliable solution for managing and preserving their information. This external tape drive is designed for small to medium-sized businesses that require high-capacity backup and archiving options. The T40 seamlessly combines efficiency with cutting-edge technology, making it a favored choice among IT professionals.

One of the standout features of the Tandberg Data T40 is its native capacity, which supports 1.5TB of storage per cartridge. With data compression, this capacity can effectively double, allowing for up to 3TB of data to be backed up in a single cartridge. This high capacity minimizes the number of tapes needed for extensive data storage, streamlining the backup process.

The T40 utilizes LTO technology, specifically LTO-5, LTO-6, or LTO-7, depending on the model. LTO, or Linear Tape-Open, is known for its high performance and reliability, offering fast data transfer rates. The T40 can achieve transfer speeds of up to 140MB/s, significantly reducing backup windows and enhancing overall productivity. Its backward compatibility ensures that users can access data stored on previous LTO generations, providing additional flexibility and security for businesses transitioning to newer technologies.

Additionally, the T40 features a simple, user-friendly interface that facilitates easy operation and maintenance. Equipped with a built-in LCD display, users can easily monitor the status of the tape drive, eliminating unnecessary guesswork. The drive's design supports extensive connectivity options, including USB 3.0 and SAS interfaces, making it compatible with various systems and infrastructure setups.

The Tandberg Data T40 is also designed with durability in mind. Its robust construction includes features that protect against dust and other environmental factors, ensuring the longevity of the device. Furthermore, its energy-efficient design helps reduce operational costs, making it an economical choice for budget-conscious organizations.

In summary, the Tandberg Data T40 is a powerful external tape drive that combines high capacity, fast performance, and reliability. Its LTO technology, ease of use, and durability make it an invaluable asset for businesses looking to safeguard their critical data while maximizing storage efficiency. Whether for backup or archiving needs, the T40 stands out as a versatile and dependable solution in the data storage landscape.
Top Page Image Contents