Reconfigure Partitions

From the FPI, select Setup > Partitions

You may later need to reconfigure your partition setup if the number of cleaning slots or I/E slot configuration are changed, or if you need to split the library into more or fewer partitions.

Exporting all cartridges assigned to the partitions that are to be reconfigured is

Note recommended.

It is not possible to edit your partition setup. If you choose to reconfigure your partition setup from the front panel interface, the old setup will be deleted.

If you choose to reconfigure your partition setup from the remote management interface and your current partition configuration has used all available resources, you will need to remove at least one partition. The resources from the deleted partition(s) can then be allocated to the remaining partition(s).

The appropriate screens to reconfigure your partition setup are:

From the RMI, select Setup > Partition/Drive

Use the next button in the setup to move to the last partition. Use the remove partition button to remove the partition. Remove as many partitions you want to, and then allocate the drives/magazines from the deleted partitions to the remaining or new partitions.

From the FPI, select Setup > Partition

Changing Partition Modes

The library has two partition modes, Online and Offline.

	Note	When changing the partition mode from online to offline, all host application
	Note	commands are completed if they are in progress when the mode is changed.

	Online	the normal operating condition for the partition. In this mode, the robotics is enabled and
	all host application commands are processed.
	Offline	the partition does not process any host application commands. If a partition is taken

offline, the physical library and other partitions are not affected.

The library is automatically taken offline when the unit is busy executing internal time consuming tasks.

In addition the user can manually take the physical library or any of its partitions online or offline. You can take a partition offline rather than the entire library so as to minimize disruption of library operations. You may manually change the partition mode to online or offline from the front panel or the remote management interface.

Details on changing partition mode include:

The default partition mode is online.

The partition mode must be set to off-line if you want to restrict host access to the specified partition.

When you are changing partition mode, be aware of the following information:

The Online/Offline buttons toggles between states.

It is only possible to set a partition offline when the partition is not in use.

Set the button to read Online to take either the physical library or a partition, depending on the current view, to an online state, which is the normal operating condition. In this mode, the robotics is enabled and all host commands are processed.

StorageLibrary Installation and User Guide

T40 specifications

Tandberg Data T40 represents a significant advancement in data storage technology, offering users a robust and reliable solution for managing and preserving their information. This external tape drive is designed for small to medium-sized businesses that require high-capacity backup and archiving options. The T40 seamlessly combines efficiency with cutting-edge technology, making it a favored choice among IT professionals.

One of the standout features of the Tandberg Data T40 is its native capacity, which supports 1.5TB of storage per cartridge. With data compression, this capacity can effectively double, allowing for up to 3TB of data to be backed up in a single cartridge. This high capacity minimizes the number of tapes needed for extensive data storage, streamlining the backup process.

The T40 utilizes LTO technology, specifically LTO-5, LTO-6, or LTO-7, depending on the model. LTO, or Linear Tape-Open, is known for its high performance and reliability, offering fast data transfer rates. The T40 can achieve transfer speeds of up to 140MB/s, significantly reducing backup windows and enhancing overall productivity. Its backward compatibility ensures that users can access data stored on previous LTO generations, providing additional flexibility and security for businesses transitioning to newer technologies.

Additionally, the T40 features a simple, user-friendly interface that facilitates easy operation and maintenance. Equipped with a built-in LCD display, users can easily monitor the status of the tape drive, eliminating unnecessary guesswork. The drive's design supports extensive connectivity options, including USB 3.0 and SAS interfaces, making it compatible with various systems and infrastructure setups.

The Tandberg Data T40 is also designed with durability in mind. Its robust construction includes features that protect against dust and other environmental factors, ensuring the longevity of the device. Furthermore, its energy-efficient design helps reduce operational costs, making it an economical choice for budget-conscious organizations.

In summary, the Tandberg Data T40 is a powerful external tape drive that combines high capacity, fast performance, and reliability. Its LTO technology, ease of use, and durability make it an invaluable asset for businesses looking to safeguard their critical data while maximizing storage efficiency. Whether for backup or archiving needs, the T40 stands out as a versatile and dependable solution in the data storage landscape.