Savin 1232 appendix Troubleshooting

Troubleshooting

	Messages/Second messages	Description	Solution
	Driver setting error.	There is an error in the down-	Reset the parameter for down-
	(Memory)	loaded font(s).	loading fonts.
		Insufficient memory or memo-	Specify correct memory capac-
		ry settings for the printer driv-	ity in the [Change Accessories...]
		er may not match memory	option in the RPCS™ printer
		actually installed.	driver's print settings tab.
			To print the image correctly,
			increase memory capacity, or
			reduce resolution image.
	Duplex has been cancelled.	Duplex printing has been can-	Confirm that the paper used is
		celed.	suitable for duplex printing.
			Or, increase memory capacity.
			When adding a memory mod-
4
			ule to the machine, contact
			your sales or service represen-
			tative.
	Ethernet board has a prob-	An error has occurred in the	Turn off the main power
	lem.	Ethernet board.	switch, and on. If the message
			appears again, contact your
			sales or service representative.
	Exceeded max capacity of	Hard disk drive capacity ex-	Delete files stored in the docu-
	document server. Cannot	ceeded storing to the docu-	ment server or decrease the
	stored.	ment server.	file size to be downloaded.
	Exceeded max number of	The maximum number of files	Delete files stored in the docu-
	files of document server. Can-	stored in the document server	ment server.
	not stored.	has been exceeded.
	Exceeded max number of	The maximum number of pag-	Delete pages stored in the doc-
	pages of document server.	es stored in the document	ument server or decrease the
	Cannot stored.	server has been exceeded.	number of pages to be down-
			loaded.
	Exceeded Max. stored files in	The maximum number of	Delete stored files or reduce
	sample print and locked	stored files has been exceeded	file sizes.
	print.	during Sample Print or
		Locked Print.
	Exceeded Max. stored pages	The maximum number of	Reduce the number of pages
	in sample print and locked	stored pages has been exceed-	to be printed.
	print.	ed during Sample Print or
		Locked Print.
	Exceeded max. pages. Collate	The maximum number of pag-	Increase memory capacity.
	is incomplete.	es has been exceeded for colla-	When adding a memory mod-
		tion.	ule to the machine, contact
			your sales or service represen-
			tative.
	Finisher is in use for another	The finisher is in use by anoth-	Wait until the other function
	function. Please wait.	er function such as the copier	has finished using the finisher.
		function.

28