Savin 1232 appendix Other Printing Problems, Status Possible Causes, Descriptions, and Solutions

Troubleshooting

Other Printing Problems

	Status		Possible Causes, Descriptions, and Solutions
	The print on the	If “Toner Saver” is selected in the [Print Quality] tab on the printer driver tab,
	entire page is fad-	the entire page will be faded when printed.
	ed.	See the printer driver's Help.
	The print smudges.	The settings have not been set to thick paper when printing on thick paper.
		•	PCL 5c/PostScript 3
			Select “Thick” for [Type] on the printer driver's [Paper] tab.
		•	RPCS™
			Select “Thick Paper” for [Paper Type] on the printer driver's [Print Set-
			tings] tab.
4	The color of the	If a specific color is missing, turn the main power switch off and on. If this
	printout is differ-	does not solve the problem, contact your sales or service representative.
	ent from the color	See the printer driver's Help.
	specified.
	When printing	If the printer driver is configured to use the graphics command, the graph-
	graphic data, the	ics command from the machine is used to print.
	output and the	If you want to print accurately, set the printer driver to print without using
	screen are differ-
		the graphics command.
	ent.
		See the printer driver's Help.
	Page layout is not	Print areas differ depending on the machine used. Information that fits on
	as expected.	a single page on one machine may not fit on a single page of another ma-
		chine.
		Adjust the [Print Area] settings in the printer driver.
		See the printer driver's Help.
	Duplex printing is	• Duplex printing cannot be done with paper set in the optional bypass
	malfunctioning.		tray. When using duplex printing, make settings to use paper from a
			tray other than the optional bypass tray.
		• Duplex printing cannot be done with thick paper, OHP transparencies,
			labels, or thin paper specified as the paper type. Specify another paper
			type.
		• Duplex printing cannot be done with a tray for which [1-Sided Copy] has
			been specified as “Paper Type” on the System Settings menu. Change
			the “Paper Type” setting for the tray to [2-Sided Copy] on the System Set-
			tings menu. See the General Settings Guide.

36