Savin 1232 appendix Interface cable, Network Connection

		Machine Does Not Print
Possible Cause		Solutions
Is the Data In indicator	If not, the data is not being sent to the machine.
blinking or lit after starting	❖ When the machine is connected to the computer using
the print job?
	the interface cable
	Confirm that the machine port settings are correct. For a paral-
	lel port connection, port LPT1 or LPT2 should be set.
	•	Windows 95/98/Me
		A Click [Start], point to [Settings], and then click [Printers].
		B Click the icon of the machine. On the [File] menu, click
		[Properties].
		C Click the [Details] tab.
		D Check the [Print to the following port] box to confirm that
		the correct port is selected.
	•	Windows 2000
		A Click [Start], point to [Settings], and then click [Printers].
		B Click the icon of the machine. On the [File] menu, click
		[Properties].
		C Click the [Port] tab.
		D Check the [Print to the following port] box to confirm that
		the correct port is selected.
	•	Windows XP Professional
		A Click [Start], and then click [Printers and Faxes].
		B Click the icon of the machine. On the [File] menu, click
		[Properties].
		C Click the [Ports] tab.
		D Check the [Point to the following port(s)] box to confirm
		that the correct port is selected.
	• Windows XP Home Edition
		A Click [Start], [Control Panel], [Printers and Other Hardware],
		and then [Printers and Faxes].
		B Click the icon of the machine. On the [File] menu, click
		[Properties].
		C Click the [Ports] tab.
		D Check the [Point to the following port(s)] box to confirm
		that the correct port is selected.
	•	Windows NT 4.0
		A Click [Start], point to [Settings], and then click [Printers].
		B Click the icon of the machine. On the [File] menu, click
		[Properties].
		C Click the [Port] tab.
		D Check the [Print to the following port] box to confirm that
		the correct port is selected.
	❖ Network Connection
	Contact your network administrator.

4

35