Appendix
Note
❒When the finisher is installed and stapling is specified for a job, the job will be delivered to the Finisher Shift Tray regardless of the output tray specified.
❒If you cannot make staple settings even with the finisher installed, options may not be set up correctly on the printer driver. Correct option settings in the printer driver. For details, see the Help of the printer driver.
❒When duplex printing is specified, adjust staple positions to the binding di- rection.
❒When the finisher is being used for another function's job (for example, a copy job), printing will start after the current job ends.
❒When setting “Staple” in the printer driver settings, make sure that the “Col- late” check box is cleared in the application's print settings. If “Collate” is en- abled in the application, printing will not occur as intended.
❒Be sure to set the paper size and orientation in the printer driver when sta- pling.
❒Depending on the application software you are using, print settings may not be saved and the printed result may not be as expected.
❒Do not pull out paper until stapling has completed as this may cause a paper
6 | jam. When paper jams occur, check the error message on the display panel of |
| the machine and remove the paper. If a paper jam occurs, see the General Set- |
tings Guide.
❒When printing restarts after removing the jammed paper, the printing posi- tion may be different depending on the location of the paper jam.
•If the paper jam occurred in the optional finisher, printing will restart from the top page of the data currently being printed, or from the page on which the paper jam occurred.
•If the paper jam occurred in the machine, printing will restart from the page on which the paper jam occurred.
❒Even if the paper jam occurred in the machine, the error will not be cleared unless the cover of the finisher is opened and closed.
❒“Staple has been canceled” is displayed on the machine's display panel when staple printing has been canceled. Staple printing will be canceled under the following conditions:
•If the number of staple jobs exceeds maximum. For information about the maximum number, see “Specification”, General Settings Guide.
•If a paper size that cannot be stapled is selected. For information about pa- per sizes that can be stapled, see “Specification”, General Settings Guide.
•If a paper type that cannot be stapled is selected.
The paper types that can be stapled are plain and recycled. Labels, thick paper and OHP transparencies cannot be stapled.
•If positions other than those fixed for stapling are specified.
54