Uniden BC 245XLT manual Charging the Battery Pack, Low Battery Indicator, Adapter Safety Feature

Page 12

Charging the Battery Pack

Use the AC Adapter/Charger to power the BC 245XLT from an AC outlet.

Use only the supplied AC Adapter (AD70U) or one of the optional power cords (WZ1015 or WZ1017).

You can use your scanner while the battery charges. To fully charge the battery, leave the AC Adapter/Charger connected for 14 – 16 hours.

Note: Disconnect the AC Adapter/Charger from the unit when charging is complete.

Low Battery Indicator

When the Battery Pack is low and needs to be charged, the battery icon appears in the display. You will also hear a beep every 15 seconds as an audible alert.

Adapter Safety Feature

The AC Adapter included with this scanner may be equipped with a polarized line plug — a plug with one blade wider than the other. This plug will fit into a power outlet only one way. If you are unable to insert the adapter’s plug into an outlet, try reversing the plug.

12

Image 12

Contents Contents Page Introduction Frequency Range Steps TransmissionImportant Notice What is Scanning? What is Searching?What is Trunk Tracking? TerminologyPage Feature Highlights Manual Channel Access Go directly to any channelPage Where to Obtain More Information Information on the InternetAC Adapter Battery Pack Included with Your ScannerSetup Installing the Battery PackCharging the Battery Pack Low Battery IndicatorAdapter Safety Feature Flexible Antenna Belt ClipSetting the Squelch Basic OperationTurn the Scanner On Keylock LCD Back LightAuto Light 3 4 5 6 7 8 9 Enter the frequency Enter the frequency number Then press Duplicate Frequency Alert TipsDeleting a Stored Frequency Scanning CHANNELS1 2 3 4 5 6 7 8 9RF Attenuation Feature Setting the Delay Mode Delay in Scan or Search ModeDelay in Manual Mode Channel LockoutLockout in Scanning Mode LockoutnTipsRestore a Locked Out Channel Restore All Locked-Out ChannelsPriority Scan Changing the Priority Channel Setting a Search Range SearchingTurbo Search Search Hold Feature Data SkipFrequency Skip Storing Search FrequenciesPage SVC Scanning Responding transmission is received, press SVC Scan Lockout Programming with SVC Scan Trunk Tracking Types of Trunking SystemsPage Edacs Tracking Programming Trunking Frequencies You will hear two Frequency, press twice, and start over Changing the Display Mode Searching a Trunked BankFrequencyn Find Mode Direct Entry ID Hold ModeRestore a Single ID ID LockoutRestore all IDs Searching TipsChannel Activity Indicators HoldnModeThen the indicators represent multiple channels Scan Lists Programming ID Scan Lists ManuallyPress twice, and start over Xpand Page ID Scan Mode Setting Priority in Trunking Mode Programming Scan Lists During Search Deleting a Stored IDMoving between Scan List Memories Multi-TrackSelecting Trunking Programming Mode Fleet Map ProgrammingSelecting a Preset Fleet Map If you are in Trunking Scan modeScanner returns to Programming Bank selecting mode Programming a Fleet MapProgramming a Hybrid System Page Toggling the Status Bit Connecting the scanner Remote InterfaceScanner to External Modem SmartScan Mode Page Program Lock Menu for SmartScan Smartscanner Tips Page Remote PC Control Mode PC Control Parameter Clone Mode Page Care and Maintenance CleaningGeneral Use LocationRepairsn BirdiesTroubleshooting Problem SuggestionTry another Preset Fleet Map or Program Specification Above bands in 5 kHz stepsPreset Fleet Maps AppendixPreset Map E1P9 Block User Defined Fleet Maps Type I Programming InformationFleet Map Size Codes Size Code Restrictions Page One Year Limited Warranty Uniden America CorporationUniden America Corporation All rights reserved. UBZZ01301ZZ 245XLT Top View and Display Page Front View