Uniden BC 245XLT manual

Page 65

6.If the connection is successful, the scanner starts frequency downloading.

7.donE will be displayed when your downloading is completed.

8.To start the scanner, you must turn the unit off/on.

If downloading is not successful, one of the following error messages will appear.

Err01: MODEM ACCESS ERROR

Err02: NO CARRIER

Err03: TELEPHONE LINE BUSY

Err04: NO ANSWER

Err05: SERVER CONNECT ERROR

Err06: DATA IDLE TIME OUT

NOTE: If the scanner does not display LoAd (see

step 6), disconnect the access by pressing . Then, make sure the modem is connected properly, and try again.

NOTE: The number preprogrammed into your scanner for downloading frequencies is 1-900-225-4822. There is a $0.99 per minute charge for using the SmartScan database.

The frequencies in the SmartScan database are updated, at a minimum, every 6 to 12 months. To get current frequencies, as well as

special /sporting event frequencies, regularly update your scanner by using SmartScan.

NOTE: If you are unable to dial a “900” number, check with your local phone company to find out if you have a “900” block on your phone line. This will prevent you from dialing to the server.

65

Image 65

Contents Contents Page Frequency Range Steps Transmission IntroductionImportant Notice What is Searching? What is Scanning?What is Trunk Tracking? TerminologyPage Manual Channel Access Go directly to any channel Feature HighlightsPage Information on the Internet Where to Obtain More InformationIncluded with Your Scanner AC Adapter Battery PackInstalling the Battery Pack SetupAdapter Safety Feature Charging the Battery PackLow Battery Indicator Belt Clip Flexible AntennaTurn the Scanner On Setting the SquelchBasic Operation Auto Light KeylockLCD Back Light 3 4 5 6 7 8 9 Enter the frequency Enter the frequency number Then press Tips Duplicate Frequency AlertDeleting a Stored Frequency CHANNELS1 2 3 4 5 6 7 8 9 ScanningRF Attenuation Feature Delay in Scan or Search Mode Setting the Delay ModeChannel Lockout Delay in Manual ModeLockoutnTips Lockout in Scanning ModeRestore All Locked-Out Channels Restore a Locked Out ChannelPriority Scan Changing the Priority Channel Turbo Search Setting a Search RangeSearching Data Skip Search Hold FeatureStoring Search Frequencies Frequency SkipPage SVC Scanning Responding transmission is received, press SVC Scan Lockout Programming with SVC Scan Types of Trunking Systems Trunk TrackingPage Edacs Tracking Programming Trunking Frequencies You will hear two Frequency, press twice, and start over Searching a Trunked Bank Changing the Display ModeDirect Entry ID Hold Mode Frequencyn Find ModeID Lockout Restore a Single IDSearching Tips Restore all IDsHoldnMode Channel Activity IndicatorsThen the indicators represent multiple channels Programming ID Scan Lists Manually Scan ListsPress twice, and start over Xpand Page ID Scan Mode Setting Priority in Trunking Mode Deleting a Stored ID Programming Scan Lists During SearchMulti-Track Moving between Scan List MemoriesFleet Map Programming Selecting Trunking Programming ModeIf you are in Trunking Scan mode Selecting a Preset Fleet MapProgramming a Fleet Map Scanner returns to Programming Bank selecting modeProgramming a Hybrid System Page Toggling the Status Bit Remote Interface Connecting the scannerScanner to External Modem SmartScan Mode Page Program Lock Menu for SmartScan Smartscanner Tips Page Remote PC Control Mode PC Control Parameter Clone Mode Page Cleaning Care and MaintenanceGeneral Use LocationBirdies RepairsnProblem Suggestion TroubleshootingTry another Preset Fleet Map or Program Above bands in 5 kHz steps SpecificationAppendix Preset Fleet MapsPreset Map E1P9 Block Type I Programming Information User Defined Fleet MapsFleet Map Size Codes Size Code Restrictions Page Uniden America Corporation One Year Limited WarrantyUniden America Corporation All rights reserved. UBZZ01301ZZ 245XLT Top View and Display Page Front View