Uniden BC 245XLT manual Care and Maintenance, General Use, Location, Cleaning

Page 74

Care and Maintenance

General Use

Turn the scanner off before disconnecting the power or replacing the batteries.

Always write down the programmed frequencies in the event of memory loss.

If memory is lost, simply reprogram each channel. The display shows 000.000 in all channels when

nthere has been a memory loss.

Always press each button firmly until you hear the entry tone for that key entry.

Location

Do not use the scanner in high-moisture environments such as the kitchen or bathroom.

Avoid placing the unit in direct sunlight or near nheating elements or vents.

If the scanner receives strong interference or electrical noise, move it or its antenna away from the source of the noise. If possible, a higher elevation, may provide better reception. Also try changing the height or angle of the antenna.

Cleaning

nDisconnect the power to the unit before cleaning.

Clean the outside of the scanner with a mild detergent. To prevent scratches, do not use abrasive cleaners or solvents. Be careful not to rub

nthe LCD window.

Do not use excessive amounts of water.

74

Image 74
Contents Contents Page Introduction Frequency Range Steps TransmissionImportant Notice What is Trunk Tracking? What is Scanning?What is Searching? TerminologyPage Feature Highlights Manual Channel Access Go directly to any channelPage Where to Obtain More Information Information on the InternetAC Adapter Battery Pack Included with Your ScannerSetup Installing the Battery PackAdapter Safety Feature Charging the Battery PackLow Battery Indicator Flexible Antenna Belt ClipTurn the Scanner On Setting the SquelchBasic Operation Auto Light KeylockLCD Back Light 3 4 5 6 7 8 9 Enter the frequency Enter the frequency number Then press Duplicate Frequency Alert TipsDeleting a Stored Frequency Scanning CHANNELS1 2 3 4 5 6 7 8 9RF Attenuation Feature Setting the Delay Mode Delay in Scan or Search ModeDelay in Manual Mode Channel LockoutLockout in Scanning Mode LockoutnTipsRestore a Locked Out Channel Restore All Locked-Out ChannelsPriority Scan Changing the Priority Channel Turbo Search Setting a Search RangeSearching Search Hold Feature Data SkipFrequency Skip Storing Search FrequenciesPage SVC Scanning Responding transmission is received, press SVC Scan Lockout Programming with SVC Scan Trunk Tracking Types of Trunking SystemsPage Edacs Tracking Programming Trunking Frequencies You will hear two Frequency, press twice, and start over Changing the Display Mode Searching a Trunked BankFrequencyn Find Mode Direct Entry ID Hold ModeRestore a Single ID ID LockoutRestore all IDs Searching TipsChannel Activity Indicators HoldnModeThen the indicators represent multiple channels Scan Lists Programming ID Scan Lists ManuallyPress twice, and start over Xpand Page ID Scan Mode Setting Priority in Trunking Mode Programming Scan Lists During Search Deleting a Stored IDMoving between Scan List Memories Multi-TrackSelecting Trunking Programming Mode Fleet Map ProgrammingSelecting a Preset Fleet Map If you are in Trunking Scan modeScanner returns to Programming Bank selecting mode Programming a Fleet MapProgramming a Hybrid System Page Toggling the Status Bit Connecting the scanner Remote InterfaceScanner to External Modem SmartScan Mode Page Program Lock Menu for SmartScan Smartscanner Tips Page Remote PC Control Mode PC Control Parameter Clone Mode Page General Use Care and MaintenanceCleaning LocationRepairsn BirdiesTroubleshooting Problem SuggestionTry another Preset Fleet Map or Program Specification Above bands in 5 kHz stepsPreset Fleet Maps AppendixPreset Map E1P9 Block User Defined Fleet Maps Type I Programming InformationFleet Map Size Codes Size Code Restrictions Page One Year Limited Warranty Uniden America CorporationUniden America Corporation All rights reserved. UBZZ01301ZZ 245XLT Top View and Display Page Front View