Uniden BC 245XLT manual Remote PC Control Mode

Page 70

Remote (PC Control) Mode

You can program and control your scanner remotely from a PC using third party software. After connecting the scanner to a PC using the Scanner to PC steps (see page 62), turn the radio off. Press and hold REMOTE key and turn the radio on. Then release the key. bc245 will flash on the display.

1.The following screen appears.

2. To control your scanner using a PC, press . Or, press

or until this screen is displayed. Then press

to select the

Remote mode.

3.Use the third party software as directed.

Start Remote Mode

Turn off the power, then turn it on again.

Press REMOTE key, until you hear two short beeps. REMOTE mode

is selected. To distinguish from Normal operation mode, “KEYLOCK” icon flashes.

During REMOTE Control mode, the scanner will ignore any key (except REMOTE key).

BANK

1

2

3

4

5

6

7

8

9

10

DATA

SCAN PRI

For information on purchasing third party software to program and control your BC 245XLT, see the flyer included in the box with this radio.

70

Image 70

Contents Contents Page Introduction Frequency Range Steps TransmissionImportant Notice What is Trunk Tracking? What is Scanning?What is Searching? TerminologyPage Feature Highlights Manual Channel Access Go directly to any channelPage Where to Obtain More Information Information on the InternetAC Adapter Battery Pack Included with Your ScannerSetup Installing the Battery PackLow Battery Indicator Charging the Battery PackAdapter Safety Feature Flexible Antenna Belt ClipBasic Operation Setting the SquelchTurn the Scanner On LCD Back Light KeylockAuto Light 3 4 5 6 7 8 9 Enter the frequency Enter the frequency number Then press Duplicate Frequency Alert TipsDeleting a Stored Frequency Scanning CHANNELS1 2 3 4 5 6 7 8 9RF Attenuation Feature Setting the Delay Mode Delay in Scan or Search ModeDelay in Manual Mode Channel LockoutLockout in Scanning Mode LockoutnTipsRestore a Locked Out Channel Restore All Locked-Out ChannelsPriority Scan Changing the Priority Channel Searching Setting a Search RangeTurbo Search Search Hold Feature Data SkipFrequency Skip Storing Search FrequenciesPage SVC Scanning Responding transmission is received, press SVC Scan Lockout Programming with SVC Scan Trunk Tracking Types of Trunking SystemsPage Edacs Tracking Programming Trunking Frequencies You will hear two Frequency, press twice, and start over Changing the Display Mode Searching a Trunked BankFrequencyn Find Mode Direct Entry ID Hold ModeRestore a Single ID ID LockoutRestore all IDs Searching TipsChannel Activity Indicators HoldnModeThen the indicators represent multiple channels Scan Lists Programming ID Scan Lists ManuallyPress twice, and start over Xpand Page ID Scan Mode Setting Priority in Trunking Mode Programming Scan Lists During Search Deleting a Stored IDMoving between Scan List Memories Multi-TrackSelecting Trunking Programming Mode Fleet Map ProgrammingSelecting a Preset Fleet Map If you are in Trunking Scan modeScanner returns to Programming Bank selecting mode Programming a Fleet MapProgramming a Hybrid System Page Toggling the Status Bit Connecting the scanner Remote InterfaceScanner to External Modem SmartScan Mode Page Program Lock Menu for SmartScan Smartscanner Tips Page Remote PC Control Mode PC Control Parameter Clone Mode Page General Use Care and MaintenanceCleaning LocationRepairsn BirdiesTroubleshooting Problem SuggestionTry another Preset Fleet Map or Program Specification Above bands in 5 kHz stepsPreset Fleet Maps AppendixPreset Map E1P9 Block User Defined Fleet Maps Type I Programming InformationFleet Map Size Codes Size Code Restrictions Page One Year Limited Warranty Uniden America CorporationUniden America Corporation All rights reserved. UBZZ01301ZZ 245XLT Top View and Display Page Front View