Uniden BC 245XLT manual Moving between Scan List Memories, Multi-Track

Page 55

Moving between Scan List Memories

There are a number of ways to step and move through your Scan List memories:

1.Press repeatedly.

2.Or, Press , then press or .

3. Or, Press , Next press 0-9 (scan list number), then press 0-9 (memory position). For example. To move to Scan List 4, memory position 10, press:

, 4, 0,

Multi-Track

The BC 245XLT allows you to track more than one system at a time. Here are some highlights of this new feature:

1.You can actually track up to 10 trunking systems at one time!

2.You can trunk scan or search and scan conventional frequencies at the same time.

3.You can program conventional frequencies in the same bank as trunking systems. After the radio finishes checking a trunked system for activity, it will conventionally scan the other frequencies in the bank (remember, only trunking frequencies are programmed in TRUNK mode).

To scan a mix of trunking and conventional banks, select the banks you wish to be active with trunking off, then

press . The radio will instantly begin scanning. If you have not programmed a trunking bank with talk group ID’s, you will receive an ERROR message for that bank. You can switch to SEARCH mode and the scanner will search for any active ID’s on the system.

55

Image 55
Contents Contents Page Frequency Range Steps Transmission IntroductionImportant Notice Terminology What is Scanning?What is Searching? What is Trunk Tracking?Page Manual Channel Access Go directly to any channel Feature HighlightsPage Information on the Internet Where to Obtain More InformationIncluded with Your Scanner AC Adapter Battery PackInstalling the Battery Pack SetupLow Battery Indicator Charging the Battery PackAdapter Safety Feature Belt Clip Flexible AntennaBasic Operation Setting the SquelchTurn the Scanner On LCD Back Light KeylockAuto Light 3 4 5 6 7 8 9 Enter the frequency Enter the frequency number Then press Tips Duplicate Frequency AlertDeleting a Stored Frequency CHANNELS1 2 3 4 5 6 7 8 9 ScanningRF Attenuation Feature Delay in Scan or Search Mode Setting the Delay ModeChannel Lockout Delay in Manual ModeLockoutnTips Lockout in Scanning ModeRestore All Locked-Out Channels Restore a Locked Out ChannelPriority Scan Changing the Priority Channel Searching Setting a Search RangeTurbo Search Data Skip Search Hold FeatureStoring Search Frequencies Frequency SkipPage SVC Scanning Responding transmission is received, press SVC Scan Lockout Programming with SVC Scan Types of Trunking Systems Trunk TrackingPage Edacs Tracking Programming Trunking Frequencies You will hear two Frequency, press twice, and start over Searching a Trunked Bank Changing the Display ModeDirect Entry ID Hold Mode Frequencyn Find ModeID Lockout Restore a Single IDSearching Tips Restore all IDsHoldnMode Channel Activity IndicatorsThen the indicators represent multiple channels Programming ID Scan Lists Manually Scan ListsPress twice, and start over Xpand Page ID Scan Mode Setting Priority in Trunking Mode Deleting a Stored ID Programming Scan Lists During SearchMulti-Track Moving between Scan List MemoriesFleet Map Programming Selecting Trunking Programming ModeIf you are in Trunking Scan mode Selecting a Preset Fleet MapProgramming a Fleet Map Scanner returns to Programming Bank selecting modeProgramming a Hybrid System Page Toggling the Status Bit Remote Interface Connecting the scannerScanner to External Modem SmartScan Mode Page Program Lock Menu for SmartScan Smartscanner Tips Page Remote PC Control Mode PC Control Parameter Clone Mode Page Location Care and MaintenanceCleaning General UseBirdies RepairsnProblem Suggestion TroubleshootingTry another Preset Fleet Map or Program Above bands in 5 kHz steps SpecificationAppendix Preset Fleet MapsPreset Map E1P9 Block Type I Programming Information User Defined Fleet MapsFleet Map Size Codes Size Code Restrictions Page Uniden America Corporation One Year Limited WarrantyUniden America Corporation All rights reserved. UBZZ01301ZZ 245XLT Top View and Display Page Front View