Uniden BC 245XLT manual Searching, Setting a Search Range, Turbo Search

Searching

Setting a Search Range

The BC 245XLT can search a specific frequency range to find frequencies if you don’t have a frequency guide available or if new stations have been added since your guide was published.

1.	Press	to stop
	scanning.
2.	Using your keypad,
	enter the lowest		1	2	3	4	5	6	7	8	9	10
	frequency of your
	search range. For
	example, enter
	155.000 MHz.
3.	Press	.
4.	Using your keypad,
	enter the highest		1	2	3	4	5	6	7	8	9	10

frequency of your search range. For example, enter 157.000 MHz.

5.Press .

6.Press .

Turbo Search

To increase the search speed from 100 to 300 steps per
second, press	when the Search mode is active.
This only applies to the transmission bands which have 5
kHz steps. (Refer to the table on page 3 for the frequency
bands.) Search flashes in the display when Turbo search
is active.
To cancel Turbo Search, press		again.

28