Uniden BC 245XLT manual Responding transmission is received, press

Page 33

6.Press to scan the MRN bank.

When an active channel is displayed, the scanner will alternate between the frequency and the Marine channel number.

7.Press to scan the WX band.

Note: It’s possible to receive more than one weather broadcast in your area. If the broadcast sounds weak or distant, press again to look for a closer station.

8.To exit SVC Scan mode, press .

1 2 3 4 5 6 7 8 9 10

1 2 3 4 5 6 7 8 9 10

During search of one of the preprogrammed service bands,

press

to stop the scan on a frequency. HOLD

appears in the display. Press

or

to move

up or down one programmed frequency, or press

to

resume scanning.

 

 

Note: If you want to remain on a channel until a

to

 

responding transmission is received, press

 

activate the two second delay feature.

 

33

Image 33
Contents Contents Page Frequency Range Steps Transmission IntroductionImportant Notice What is Searching? What is Scanning?What is Trunk Tracking? TerminologyPage Manual Channel Access Go directly to any channel Feature HighlightsPage Information on the Internet Where to Obtain More InformationIncluded with Your Scanner AC Adapter Battery PackInstalling the Battery Pack SetupCharging the Battery Pack Low Battery IndicatorAdapter Safety Feature Belt Clip Flexible AntennaSetting the Squelch Basic OperationTurn the Scanner On Keylock LCD Back LightAuto Light 3 4 5 6 7 8 9 Enter the frequency Enter the frequency number Then press Tips Duplicate Frequency AlertDeleting a Stored Frequency CHANNELS1 2 3 4 5 6 7 8 9 ScanningRF Attenuation Feature Delay in Scan or Search Mode Setting the Delay ModeChannel Lockout Delay in Manual ModeLockoutnTips Lockout in Scanning ModeRestore All Locked-Out Channels Restore a Locked Out ChannelPriority Scan Changing the Priority Channel Setting a Search Range SearchingTurbo Search Data Skip Search Hold FeatureStoring Search Frequencies Frequency SkipPage SVC Scanning Responding transmission is received, press SVC Scan Lockout Programming with SVC Scan Types of Trunking Systems Trunk TrackingPage Edacs Tracking Programming Trunking Frequencies You will hear two Frequency, press twice, and start over Searching a Trunked Bank Changing the Display ModeDirect Entry ID Hold Mode Frequencyn Find ModeID Lockout Restore a Single IDSearching Tips Restore all IDsHoldnMode Channel Activity IndicatorsThen the indicators represent multiple channels Programming ID Scan Lists Manually Scan ListsPress twice, and start over Xpand Page ID Scan Mode Setting Priority in Trunking Mode Deleting a Stored ID Programming Scan Lists During SearchMulti-Track Moving between Scan List MemoriesFleet Map Programming Selecting Trunking Programming ModeIf you are in Trunking Scan mode Selecting a Preset Fleet MapProgramming a Fleet Map Scanner returns to Programming Bank selecting modeProgramming a Hybrid System Page Toggling the Status Bit Remote Interface Connecting the scannerScanner to External Modem SmartScan Mode Page Program Lock Menu for SmartScan Smartscanner Tips Page Remote PC Control Mode PC Control Parameter Clone Mode Page Cleaning Care and MaintenanceGeneral Use LocationBirdies RepairsnProblem Suggestion TroubleshootingTry another Preset Fleet Map or Program Above bands in 5 kHz steps SpecificationAppendix Preset Fleet MapsPreset Map E1P9 Block Type I Programming Information User Defined Fleet MapsFleet Map Size Codes Size Code Restrictions Page Uniden America Corporation One Year Limited WarrantyUniden America Corporation All rights reserved. UBZZ01301ZZ 245XLT Top View and Display Page Front View