ID Scan Mode
1. Press 
to begin scanning the lists you have programmed.
If you haven’t programmed any IDs, SCAN displays but your scanner cannot stop on an active conversation.
2. To remove a Scan List from active scanning, press the number of the Scan List on your keypad.
The Scan List indicator turns off, and the IDs in that list are not scanned.
Note: One Scan List must always be active. If you try and deactivate all the Scan Lists, Scan List 1 will automatically be active.
3. To restore a Scan List to active scanning, press its
number again.
4.Press 
to return to Trunk Tracking Search mode.
To alternate your display between the trunking repeater indicators and the Scan List indicators,
press 
.
52