Clone Mode
You can clone the frequency data of one BC 245XLT scanner to another. After connecting the two scanners, using the Scanner to Scanner steps (See page 63), make sure the scanners are turned off. On each scanner, press and hold REMOTE key and turn the radio on. Then release the key. bc245 will appear on the display.
1. On each scanner, | |
press | or |
or | until this |
screen is displayed on both scanners. Then press 
.
(Clone Mode)
2.Determine the scanner that has the frequency data that you want to transfer. This one must be set up as the “First” unit, and the other must be set as the “Clone”.
3.On the scanner that has the desired frequency data, press the 
key until FirSt appears in the display.
4.On the scanner that is the “Clone”, press the 
key until ClonE appears in the display.
5.Press the 
key on both scanners. The data transfer is started from the “First” unit to the “Clone” unit.
72