Worth Data user manual RF Laser Setup Menu, Link Test Code

Appendix J

RF Laser Setup Menu

To change a setting using the RF Laser Setup Menu:

•Scan START SETUP to enter setup mode

•Scan the parameter you want to change (i.e. Code 3 of 9)

•Choose the setting you want to change and scan the corresponding letter or number from the Barpad Table (0-9, A-F)

•When all changes have been made, scan END SETUP

•For Preamble and Postamble settings, use the FULL ASCII MENU

•* indicates default settings

RF Laser Setup

	Start Setup	End Setup
*/+/*		*/-/*
	Channel	Aiming Dot Duration
*/0/*		*/K/*
	Scan 0-9 to select channel	Scan 2 digits from 00 to 99 (9.9 seconds) to
		set aiming dot duration.
	Preamble	Postamble
*/1/*		*/2/*
	Scan up to 15 characters from the Full	Scan up to 15 characters from the Full ASCII
	ASCII Menu. Scan SET when completed.	Menu. Scan SET when completed.
	Terminator Character	Characters
	*/H/*	*.1.*
* 0 Enter		Scan up to 8 sets of hex characters to
	1 None	reassign and delete characters in the bar
	2 Tab	code output. Scan SET when completed.

Link Test Code

*--*

Test RF Transmission without tramsmitting data.

47