Worth Data RF Laser user manual GS1 US

Page 42

The Mod 10 Check digit is calculated the same as the Interleaved 2 of 5 example in Appendix G. It is the data length as well as the MOD 10 check digit that distinguishes the UCC Serial Shipping Container Code from other UCC /EAN 128 bar codes.

UCC/EAN 128 is enabled by scanning the appropriate bar codes on the RF Laser Reader Setup Menu. If UCC/EAN 128 is enabled, you will be able to read both standard Code 128 bar codes as well as the UCC/EAN 128 bar codes with the Function 1 character and the Mod 10 check character.

UCC 128 Shipping Container Code

The UCC 128 specification is used extensively by the retail industry. If you have a requirement for a UCC 128 Serial Shipping Container bar code, be sure to follow the specification as closely as possible as many vendors will impose fines for non-conformance. For more information on UCC/EAN 128, contact GS1 US at:

GS1 US

7887 Washington Village Drive, Suite 300 Dayton, OH 45459

937-435-3870

937-435-7317 info@uc-council.org 8:00 a.m. to 6 p.m. EST

Many of the specifications are available online at:

http://www.uc-council.org

38

Image 42

Contents Worth Data Inc August Page Table Of Contents Introduction Installation Components of RF Laser ReadersScanner Beeps and LEDs what they mean USB Installation Installing the R/F Reader with a dedicated serial port Installing the R/F Reader between a computer and terminal MenuF36, DB9 Straight Cable Pin-outs Laser Serial Model Pin-outsF34, DB25 Null Modem Cable ModUPC\EAN Laser Scanning Instructions Using The RF Laser Setup Menu Channel Code 3 of 9 CodeUPC/EAN Code Codabar Disable MSIMSI and Plessey 5 Code5 Data Length Beep OptionsPreamble XYZ123 PostambleBar Code Data Preamble Data Transmitted 123 12345678Characters Set ID CharacterLink Test Code Scan End Setup ResetScan Start Setup Scan Aiming Dot Duration Scan Start Setup Scan 2Scan Start Setup Scan Terminator Scan Start Setup Scan 2 of 5 CodeScan Start Setup Scan Code Parity Baud rateData bits Stop bitsTest the RF Laser with your computer Page Radio Considerations Operational DetailsRange Accumulate Mode Function/Control Key Support PC Key Full Ascii Menu Bar CodeWindows Key Command and Option Keys on Mac USB KeyboardsFunction keys F11 and F12 Full Ascii MenuReader wont beep when reading bar codes TroubleshootingAll Models Troubleshooting Poor read rateUSB Trouble Shooting Windows XPSerial Troubleshooting Reader doesnt beep when you try to read your bar codesData characters are garbled or missing Changing Jumpers and Channels Page Recharging the Batteries Specifications for Code American National Standards Institute Customer Service108/43 = 2 with a Remainder Table C-1. Mod 43 Check character calculation for Code+ 2 + 3 + 33 + 34 + 35 = Value 22 is the Check CharacterFull Ascii Extension to Code Table C-2. Full Ascii TableCode 93 Specifications Codabar Specifications A12345bCode 128 Specifications UCC-128/ EAN-128GS1 US Interleaved 2 of 5 Code Interleaved 2 of 5 Mod 10 check digit calculation60 57 = 019873UPC Specifications Isbn Specifications UPC 2 and 5-character supplemental codes33 x 3 = 18314589938+ 9 +8 + 4 + 3 + 1 = + 9 + 5 + 1 + 8 =1234500006 0123450000601234565 MSI/Plessey Specifications + 12 + 32 + 35 + 30 + 28 + 6 + 12 + 36 = 9434578424,5,6,7,2,3,4,5,6,7 195/11 = 17 remainderRF Laser Setup Menu RF Laser SetupLink Test Code 5 Length Code 35 Code RSS-14Code SET ClearRF Base Station Setup Menu Start Setup for Base onlyFull Ascii Menu 056 057 058 059 060 061 062 063 064 065 066 067 +T* *+U* *+V* *+W +X* *+Y* *+Z* *%P%R* *%S* *%T Index 33, 37, 38, 39, 43See Appendix J UPC/EAN