Panasonic AJ-LT85P manual Tape Protect

DETAILED DESCRIPTION OF SET-UP MENUS

TAPE PROTECT

	Item		Setting		V	V
				Description of setting	T	T
No.	Item	No.	Item		R	R
					1	2
400	STILL	0000	0.5s	This selects the time taken before the tape protection mode is established
	TIMER	0001	5s	when the laptop has been left standing in the stop or search STILL
		0002	10s	(JOG/VAR/SHTL) mode.
		0003	20s	(Units: s: seconds min: minutes)
		0004	30s	<Note>	ª	ª
		0005	40s	In the case of the DV format, the time will remain at 10 seconds even if a
		0006	50s	value higher than 10 seconds has been selected. However, operation will last
		0007	1min	for up to 2 minutes on the selection screen.
		0008	2min
401	SRC	0000	STEP	This selects the operation in the tape protection mode when the laptop has
							Detailed
	PROTECT	0001	HALF	been left standing in the STILL mode.
				0: STEP (STEP FWD in STILL mode)
				1: Half loading	ª	ª
				<Note>
		0001	ON	When STEP FWD has been selected, operation is automatically transferred	ª	ª	description
				0: The drum is stopped.
				to half loading after the laptop has been left standing in the STILL mode for a
				total of 30 minutes with the DVCPRO format or for a total of 1 minute with the
				DV format.
402	DRUM STDBY	0000	OFF	This selects whether the drum is to be stopped in the standby OFF mode.
				1: The drum keeps rotating.			of set
403	STOP	0000	STEP	This selects the tape protection mode when the unit is left standing in the stop
	PROTECT	0001	HALF	mode.			-
							up
				0: Step FWD
				1: Half-loading	ª	ª	menus
				<Note>
				When step FWD has been selected, the mode will be automatically trans-
				ferred to half-loading when the unit has been left standing in the stop mode
				for a total of 30 minutes (or 1 minute for a DV tape).

The underlined number and item are the factory settings.

29