Panasonic AJ-LT85P manual Waveform on WFM Waveform on VSC

Page 64

ENCODER ADJUSTMENTS

@Set the REMOTE/LOCAL switch to the position (LOCAL) where the adjustment is to be made.

#Conduct the adjustments using a discrete source unit.

Any deviation in the set-up level, video level, chroma level or hue will cause color shifting in the recorder. Adjust them using a discrete player.

1)Play back a cassette tape on which standard color bars have been recorded.

2)Adjust the controls in such a way that the waveform monitor (WFM) and vectorscope (VSC) achieve the following.

•Video level: Adjust this to 100IRE.

õChroma level, hue: Adjust the two controls, and place the trace of the vector waveforms at the mark ‚ Set-up level: Adjust so that there is no deviation.

■Waveform on WFM

■Waveform on VSC

A

B

.

C

3) Conduct the same adjustments for the connected source unit.

$Adjust the SYSTEM PHASE controls.

1)Play back the standard color bars on VTR1.

2)Adjust the SYSTEM PHASE controls of VTR1.

Adjust so that the waveform monitor (WFM) achieves the following.

1.In the INT mode, expand the waveform on the WFM to 0.1∝s.

2.Check the H SYNC position.

3.Now set the WFM to the EXT mode.

4.In the EXT mode, adjust the SYSTEM PHASE (H SC FINE, SC COARSE) controls in such a way that the H SYNC sig- nal is aligned with the position in 2.

■Waveform on WFM

	In INT mode
(0.1μs expansion)	In EXT mode
	Adjust.

(Note the SYNC fall.)

64

Image 64

Contents Operating Instructions For Your Safety FCC NoteContents Features IntroductionControls and Their Functions Liquid-crystal monitor sectionCounter display section Front Keyboard Switches Level Controls Player/Recorder Control Section VTR Control Section for both VTR1 and VTR2Edit Mode Setting Section Automatic Editing Control Section Button for both VTR1 and VTR2 OUT button for both VTR1 and VTR2PREVIEW/REVIEW button 0AUTO EDIT/MULTI buttonFront Section Side Panel Section for both VTR1 and VTR2Top Section Connector Section for both VTR1 and VTR2 Opening and Closing the Laptop OpeningCompatible Tapes Use of Panasonic consumer DV cassette tapes is recommendedConnections for transmission Microwave transmitter System ConnectionsAC adaptor Backup recording using 2 VTRs Recording the same signal on 2VTRsRecording different signals on 2 VTRs System applicationsSwitch setting Editing controllerUsing two VTRs as source units for AB roll editing VTR2When using an external VTR as the editing source unit Control EXT VTR Play Delay VTR1External VTR AJ-LT85 Control EXT VTRSET-UP Menu Operations Detailed Description of SET-UP Menus BasicOperation Humid OPESearch DialInterface Edit Synchro EDL AutoCLR AfterTape Protect Time Code TC Mode PresetPhase Corr FreeVideo Audio ST1 OutputST2 PB FadeSystem Preparation of Editing Tape Standard mode Basic Flow of Editing Operations1st edit PreviewAssemble edit mode Insert edit modeTypes of Edit Modes and Illustrations Split editingEdit mode selection CUT Editing ProcedureSearch dial To produce a still picture of the desired scene Edit point registrationDuring normal playback press the Still button Edit point checking, revising and clearing To recall the contents of the previous preview When preview is executedTo suspend preview and execute automatic editing Editing execution Cut editingReview Revising an edit in point Audio Split Editing ProcedureDisplaying the audio split amount Correcting an edit in point Video Split Editing ProcedureDisplaying the video split amount When executing editing without preview Editing by Edit in Point Setting onlyStill Picture Editing Auto TAG Editing Track FunctionTC Jump Function How to register events When 00 appears as the event numberEvent Editing Registering eventsAccessing the event ahead of the event now displayed Accessing an event prior to the event now displayedCalling an event Clearing all the events initializing the EDL Revising and clearing eventsExecuting event editing Calling the previously previewed contents Edit Data Management EDLN35 Displaying event numbersEdit Data Dumping TO/LOADING from AN External Device Steps taken for dumpingSteps taken for loading DumpFormat selection common to Dump and Load Communications parameter settingsDCD DTR GND DSR RTS CTS Event numbers Effect type Reference Concerning the EDL formatReel numbers Audio split editing CH2 CH1 CH1 CH2CH1/CH2 Connections with the AJ-YA752 Audio Memory Unit VTRTime codes Time code generator TCG and user bit generator UBG modesUser bit Time Codes TC and User Bits UB Auto Edit mode VTR2 only Mode other than Auto Edit VTR1 and VTR2Vitc output specifications TC OUT LTC output specificationsREC Same function Turning on the REC Same functionTo adjust the encoder using the laptop Encoder AdjustmentsSending out the signals Waveform on WFM Waveform on VSC Waveform on WFMLIQUID-CRYSTAL TV Monitor Adjustments Adjustment in display sectionAdjustments in set-up menu mode To adjustment the brightnessSuperimpose Screen Displays To superimpose displaysBlock Search speed displayCharacters displayed What is displayedCTL counter display Connector Signals AudioError Messages Error No Details of error VTR operationTake-up reel motor speed is abnormally high To transfer from a regular mode to the Diag mode To return from the Diag mode to the normal modeDIAG-MENU Operations To display the versionDetailed Description of Diag Menu Video head cleaning MaintenanceOthers CondensationSpecifications General VideoSpecifications Panasonic Canada Inc