Panasonic AJ-LT85P manual Time Code

DETAILED DESCRIPTION OF SET-UP MENUS

TIME CODE

	Item		Setting		V	V
				Description of setting	T	T
No.	Item	No.	Item		R	R
					1	2
500	VITC	0000	10L	This sets the position where the VITC signal is to be inserted. (The same line
	POS-1			as that selected for 501:VITC POS-2 cannot be selected.)	ª ª
		0006	16L
		0010	20L
501	VITC	0000	10L	This sets the position where the VITC signal is to be inserted. (The same line
	POS-2			as that selected for 500:VITC POS-1 cannot be selected.)	ª ª
		0008	18L
		0010	20L
502	VITC	0000	BLANK	This sets whether the VITC data is to be output to the position which has
	BLANK	0001	THRU	been selected by 500:VITC POS-1 and 501:VITC POS-2.	ª ª
				0: VITC data is not output.
				1: VITC data is output.
503	TCG	0000	TC&UB	This selects the signal to be regenerated when the TCG is in the REGEN
	REGEN	0001	TC	mode.	ª ª
		0002	UB	0: Both the time code and user bit are regenerated.
				1: Only the time code is regenerated.
				2: Only the user bit is regenerated.
504	BINARY	0000	000	This sets the status for using the user bit of the time code generated by the
	GP	0001	001	TCG.
		0002	010	0: NOT SPECIFIED (character set is not used)
		0003	011	1: ISO CHARACTER (8-bit character set complying with ISO646 and
		0004	100	ISO2022 is used)	ª ª
		0005	101	2: UNASSIGNED-1 (not defined)
		0006	110	3: UNASSIGNED-2 (not defined)
		0007	111	4: UNASSIGNED-3 (not defined)
				5: PAE/LINE (SMPTE262M page/line multiplexing system)
				6: UNASSIGNED-4 (not defined)
				7: UNASSIGNED-5 (not defined)
505	TCG CF	0000	OFF	This selects whether the CF flag of the TCG is to be used.	ª ª
	FLAG	0001	ON	0: CF flag is not used.
				1: CF flag is used.
506	DF MODE	0000	DF	This selects the drop frame or non-drop frame mode for CTL and
		0001	NDF	TCG.	ª ª
				0: For establishing the drop frame mode.

1:For establishing the non-drop frame mode.

The underlined number and item are the factory settings.

30