Panasonic AJ-LT85P manual Edit

DETAILED DESCRIPTION OF SET-UP MENUS

EDIT

	Item		Setting		V	V
				Description of setting	T	T
No.	Item	No.	Item		R	R
					1	2
300	SERVO	0000	AUTO	This selects the signal with which the servo is synchronized.
	REF	0001	EXT*	0: During recording or editing, the servo is synchronized with the input signal;	ª	ª
				during playback, it is synchronized with the REF signal.
				1: The servo is synchronized with the REF signal at all times.
301	PLAY	0000	0 (VTR1)	This sets the PLAY delay time in 1-frame increments.
	DELAY			<Note>
		0004	4 (VTR2)	When VTR1 or VTR2 is connected to the external unit and controlled from	ª	ª
				external source, set the PLAY DELAY setting value in accordance with the
		0015	15	system connection.
302	AUD EDIT	0000	CUT	This selects how the audio edit IN point is to be linked.		ª
	IN	0001	FADE	0: Cut processing
				1: Fade processing
303	AUD EDIT	0000	CUT	This selects how the audio edit OUT point is to be linked.		ª
	OUT	0001	FADE	0: Cut processing
				1: Fade processing
304	BEEP	0000	OFF	This sets whether a confirmation beep is to be output.
		0001	ENTRY	0: No beep is output.
		0002	ALL 1	1: A beep is output with entries, errors and warnings.
		0003	ALL 2	2: A beep is output with entries, errors and warning and when an edit IN or		ª
				OUT point is passed.
				3: A confirmation beep is emitted when an ENTRY or EDIT IN point is passed
				and when an error or warning has occurred. It is not emitted when an EDIT
				OUT point is passed.
305	AUTO	0000	OFF	This sets whether the value of the previous edit OUT point is to be registered
	ENTRY	0001	REC	automatically as the next edit IN point after automatic editing.		ª
		0002	ALL	0: Value is not automatically set.
				1: Value is automatically set for VTR2 only.
				2: Value is automatically set for both VTR1 and VTR2.
306	SV-UNLK	0000	EDIT	This selects whether editing is to be suspended when servo lock fails to be
	EDIT	0001	ABORT1	engaged.
		0002	ABORT2	0: Editing is executed rather than suspended.		ª
				1: Editing is suspended when the servo fails to be engaged during the editing
				approach section.
				2: Editing is suspended when the servo fails to be engaged during the editing
				approach section or after entry into the editing/recording section.

The underlined number and item are the factory settings.

*The EXT setting can be performed only for VTR2.

Detailed description of set-up menus

27