Panasonic PT-D5500UL manual Adjusting the picture

Adjusting the picture

•For RGB/DVI signals only

	PICTURE
PICTURE MODE		GRAPHIC
BRIGHT		32
CONTRAST		32
COLOR TEMP.		DEFAULT
SHARPNESS		06
AI		ON
SYSTEM		RGB
SELECT	ADJ		RETRN

•For S-Video/Video/YPBPRsignals only

	PICTURE
PICTURE MODE		STANDARD
BRIGHT		32
CONTRAST		32
COLOR		32
TINT		32
COLOR TEMP.		DEFAULT
SHARPNESS		06
NR		ON
AI		ON
TV-SYSTEM		AUTO1
SELECT	ADJ		RETRN

PICTURE MODE

The picture mode can be selected from the following depending on viewing conditions and the video signal source in use:

DYNAMIC	: Picture brightness/contrast ratio is
	increased to suit brighter viewing
	environments.
GRAPHIC	: The picture becomes suitable for
	input from to the personal
	computer.

STANDARD : The picture becomes suitable for

	moving images in general.
CINEMA	: The picture becomes suitable for
	movie sources.
NATURAL	: The picture becomes suitable for
	use in a dark room.

BRIGHT

“BRIGHT” is used to adjust the black level (brightness).

: Raises the picture brightness. : Lowers the picture brightness.

CONTRAST

“CONTRAST” is used to adjust the contrast ratio.

: Raises the contrast ratio. : Lowers the contrast ratio.

COLOR

(For S-Video/Video/YPBPRsignals only)

: Deepens colors. : Weakens colors.

TINT

(For S-Video/Video/YPBPRsignals only) “TINT” is used to adjust human skin.

: Adjusts skin tone toward greenish color. : Adjusts skin tone toward reddish-purple.

COLOR TEMP.

The color temperature is adjusted when the white areas of images take on a reddish or bluish hue.

DEFAULT: Standard setting

HIGH	: The white areas take on a more
	bluish-white hue.
MIDDLE	: The white areas take on a slightly
	reddish hue.
USER	: The RGB values of the white balance
	are set separately.
	Press the ENTER button, select “W-
	BAL HIGH” or “W-BAL LOW”, and
	proceed with the detailed settings.
	: The colors of the selected item
	are darkened.
	: The colors of the selected item
	are lightened.

29