Panasonic PT-D5500UL Setting the network Connecting a PC, System requirements, Connection example

Setting the network Connecting a PC

The settings required for the network must be established in order to use the web browser (page 46) functions that the PC uses to control the projector.

		NETWORK
	HOST NAME
	DHCP		OFF
	IP ADDRESS
	NET MASK
	GATEWAY
	MAC ADDRESS
	STORE
	SELECT	ENTER		RETRN
HOST NAME			: Make alteration if necessary
			when to use the DHCP server.
DHCP			: Set the DHCP item to ON when
			to acquire an IP address
			automatically using the DHCP
			server.
			Set to OFF if DHCP server is not
			used.
IP ADDRESS			: Enter the IP address if DHCP
			server is not used.
NET MASK			: Enter the net mask if DHCP
			server is not used.
GATEWAY			: Enter the gateway address if
			DHCP server is not used.
MAC ADDRESS : Displays the MAC address
			(Media Access Control Address),
			which is proper to the network
			device.
			This function may be needed
			when to use the DHCP server.
STORE			: The settings are stored in the
			memory.

Attention • Before using the DHCP server, make sure the DHCP server is already

functioning.

•For details of IP address, net mask, and gateway, ask the network administrator.

System requirements

The following system specifications are required in order to use the networking functions.

•PC

OS	: Windows XP/2000/Me (Millennium
	Edition)/98SE (Second Edition)
CPU	: Pentium processor or faster
RAM	: 64 MB or more (128 MB or more for

Windows XP/2000)

Web browser: Internet Explorer 6.0 or newer, Netscape Communicator 7.0 or newer

•LAN cable

Type : Category 5 compatible straight cable

Length: 100 meters or less

Attention • If you want to use the e-mail function, make sure the system can handle e-

mail.

Operation is not guaranteed for all computers that meet the above conditions.

Connection example

Projector

Personal computer

		R/PR	G/Y	B/PB	SYNC/HD	VD
VIDEO IN	S-VIDEO IN			RGB 1 IN			RGB 2 IN	DVI-D IN
	REMOTE 1		REMOTE 2 IN		IN	SERIAL	OUT
	IN	OUT

10 BASE-T or 100 BASE-TX

LAN cable	LAN cable
(straight)	(straight)

Hub

Attention • Touching the LAN port with your hand (or body) when you are carrying a

static charge may damage the equipment due to a discharge of static electricity. Therefore, be careful not to touch the LAN port or metal parts of the LAN cable.

37