When inserting the battery, make sure the polarities (+ and
•If the battery is inserted incorrectly, it may explode or leak, and fire, injury or contamination of the battery compartment and surrounding area may result.
Use only the Specified battery.
•If an incorrect battery is used, it may explode or leak, and fire, injury or contamination of the battery compartment and surrounding area may result close to this port, otherwise burns or damage could result.
Do not look into the lens while the projector is being used.
•Strong light is emitted from the projector’s lens. If you look directly into this light, it can hurt and damage your eyes.
Do not use the old lamp unit.
•The lamp section may break.
Disconnect the power cord plug from the wall outlet as a safety precaution before carrying out any cleaning.
•Electric shocks can result if this is not done.
Ask an Authorized Service Center to clean inside the projector at least once a year.
•If dust is left to build up inside the projector without being cleaned out, it can result in fire or problems with operation.
•It is a good idea to clean the inside of the projector before the season for humid weather arrives. Ask your nearest Authorized Service Center to clean the projector when required. Please discuss with the Authorized Service Center regarding cleaning costs.
Do not reach for the openings beside the optical lens, during horizontal or vertical movements of the lens there is a injury hazard.
An effort to keep our environment clean, Please bring the non repairable unit your Dealer or a Recycling Company.
Accessories
Check that all of the accessories shown below have been included with your projector.
Remote control unit [N2QAEA000023 x 1]
Power cord [K2CF3EH00001 x 1]
Wired cable for remote control [15m (49'3"), K1EA03NA0001 x 1]
Battery for remote control unit [R03NW/2ST x 1]
Lens cover
7