Zebra Technologies P100iTM manual Printing a Test Card

P100i Printer Setup

Printing a Test Card

Printing a Test Card

With Ribbon Cartridge and Card Cleaning Cartridge loaded, your P100i Printer is ready to print. To check the operation of the printer, you should print a test card.

1.Place the printer power switch in the OFF (O) position.

2.While holding down the Multi-Function Control Button, place the printer power switch in the ON ( ) position. The LCD status window will glow blue.

Multi-	Power
	Switch
Function
Control
Button

P100i

Serial Nr: 060376

Firmware: V1.50

Head resistance: 1568

Offset: X002 - Y015

EC: 0014

Printing Counter: 00002716

3.Keep pressing the Multi-Function Control Button until you are prompted to insert a card.

4.Insert a card into the card entry slot. At this point, you can release the Multi-Function Control Button.

5.A test card will print after a few seconds and then exit the printer.

34 P100i User’s Manual 980590-001 Rev. A