Zebra Technologies P100iTM manual Resetting to Factory Defaults, Printing a Configuration Card

Troubleshooting

Troubleshooting the Ethernet Connection and Adapter

Resetting to Factory Defaults

To reset the Ethernet Adapter configuration parameters to the factory defaults:

1.Press the Ethernet Reset Button, and hold it in while turning the printer power ON ( ).

Ethernet Reset Button

2.Keep the Panel Button pressed until the Status Indicator light turns GREEN.

3.Then release the Ethernet Switch.

Printing a Configuration Card

To print a configuration card, press and hold the Ethernet Switch until a card starts to print.

980590-001 Rev. A P100i User’s Manual 55