Zebra Technologies P100iTM manual Ethernet Adapter Status Indicator

Introduction

Features, Controls, and Indicators

If your P100i Printer includes the Ethernet option, the rear of the printer will look like the figure below.

Power

Socket

For Ethernet connection, refer to Appendix C, Connecting to a Network.

Ethernet Adapter Status Indicator

1.During normal operation, the LED is solid GREEN for more than 30 seconds. This indicates all the hardware is functioning properly, and the Ethernet Adapter has detected the presence of the network. It does not mean the Ethernet Adapter has an IP address or is attached to a printer queue.

2.If the LED is slowly flashing GREEN (1 time/sec), the Ethernet Adapter is trying to print.

Network Status/Activity Indicator

1.If the LED is solid GREEN, a 100Base link is established.

2.If the LED is flashing GREEN, a 100Base link is established, and network activity has been detected.

3.If the LED is solid ORANGE, a 10Base link is established.

4.If the LED is flashing ORANGE, a 10Base link was established, and network activity has been detected.