Zebra Technologies P100iTM manual How to Clean

Cleaning

Cleaning the System

How to Clean

1.Leave power on.

Multi-Function

LCD Panel

Multi-Function

Control Button

Printer Path

Cleaning Card

2.Press and hold the Multi-Function Control Button for 5 seconds.

3.When the cleaning cycle is initiated, the LCD message REMOVE RIBBON THEN CLOSE LID will display.

4.If the lid is opened and closed without removing the ribbon, the message REMOVE RIBBON THEN CLOSE LID will remain.

5.After the ribbon is removed and the lid is closed, the messages CHECKING RIBBON and

CLEANING CYCLE will display.

6.The message FEED LONG CLEANING CARD IN EXIT will display. When the card sensor registers the presence of the cleaning card, the rollers should take the card into the printer.

7.The message CLEANING HEAD will display.

8.The message CLEANING ROLLERS will display.

9.When the cleaning process is done, the printer will eject the cleaning card. If the card sensor still senses the cleaning card, the message REMOVE LONG CLEANING CARD will display.

10.After the card is removed, the LCD will display READY. You may now reload the ribbon and continue printing.

42 P100i User’s Manual 980590-001 Rev. A