Epson SE450 manual ESC Q Set Top Margin, ESC S Set Font to 20 cpi, ESC T Set Font to 7 cpi

Page 32

Command Reference

ESC Q Set Top Margin

Description

Provided for LabelWriter raster compatibility.

ESC S Set Font to 20 cpi

Description

Changes to the 20 cpi micro font. The cell dimension is 16 H x 10 W.

Fonts may only be changed at the beginning of a line, prior to any printable characters. This font will remain in effect until the printer is reset (by the ESC @ or ESC * command) or another font is selected.

See Also

ESC M

ESC P

ESC T

ESC U

Expression

ASCII	ESC S
Decimal	27 83
Hex	1B 53

Parameters

None

	Font	Height	Width	Horizontal	Vertical cpi
	Font	Height	Width	cpi	Vertical cpi
				cpi
	ESC S	16	10	20.3	12.7
	ESC P	24	12	16.9	8.4
	ESC M	32	16	12.7	6.4
	ESC U	32	20	10.2	6.4
	ESC T	56	28	7.3	3.6

ESC T Set Font to 7 cpi

Description

Changes to the 7 cpi headline font. The cell dimension is 56 H x 28 W.

26

Image 32

Contents Technical Reference Copyright Contents Page Character Codes Configuration Menu Printer Specifications This page intentionally left blank for double-sided printing Introduction This page intentionally left blank for double-sided printing Configuring the Host Computer for RS-232 Serial Interface RS-232 SettingsRS-232 Signal Levels RS-232 CablingProgramming Overview Programming the LabelWriter PrinterResetting the Printer Command ParametersCharacter Evaluation Bit Character ParametersConversions Print Modes Font SpecificationsObjects Raster Mode OrientationLandscape Mode Text ObjectsBarcode Objects Graphic Objects Line ObjectsCommand Reference Alphabetical Command ListESC L Commands by Function Position ControlFont Control GS DC2 GS DC3 GS RS GS USPrintable Characters BarcodesMiscellaneous 20h FFh Printable Characters CommandsRaster Compatibility DC4 Cancel Double Wide Mode CR Carriage ReturnESC B Set Dot Tab ESC a Return Printer StatusESC a Return Hardware Status ESC D Set Bytes per Line ESC c Set Print Temperature to LowESC d Set Print Temperature to Medium ESC e Set Print Temperature to Default ESC E Form FeedESC g Set Print Temperature to High ESC F 1 n Feed n LinesESC h Set Print Speed to Fast ESC i Set Printing Speed to BarcodeESC L Set Feed Length ESC M Set Font to 12 cpiESC P Set Font to 16 cpi ESC T Set Font to 7 cpi ESC Q Set Top MarginESC S Set Font to 20 cpi ESC U Set Font to 10 cpi ESC V Return Firmware Revision ESC W Wrap DataESC X Set Horizontal Starting Position ESC Y Set Vertical Starting PositionESC * Reset to Defaults ESC @ Reset to Power-up ConditionESC y Set 203 x 203 dpi ESC z Set 136 x 203 dpiETB Raster Mode Compressed Graphics FF Form Feed GS a Starting Position of Bar Code GS DC2 Set Font to Double HeightGS DC3 Cancel Double Height GS d Feed n Text LinesGS h Set Barcode Height GS k Print BarcodeData Matrix Barcode UPC-ASupported Square Data Matrix Symbol Sizes Supported Rectangular Data Matrix Symbol Sizes Commands Command Reference GS l Draw Line in Landscape Mode Least significant byte of the line length in dots GS L Set Feed Length GS RS Set Inverse Print Mode GS q Print UPC/EAN ChecksumGS S Return Printer Status ReturnsGS T Select Line Wrap/Truncate Modes GS t Set Characters per Line in LandscapeGS US Cancel Inverse Print Mode GS u Set Characters per Line in PortraitGS V Set Print Orientation GS W Set Bar Code Element WidthGS ~ Enter Debug Mode GS w Set Barcode Module WidthGS * Landscape Mode Graphics LF Line Feed SO Set Font to Double Wide ModeHT Horizontal Tab SYN Raster Mode Graphics Using the Caret Feature Caret FeatureActivating the Caret Feature Command Reference Character Codes CharCharacter Codes CharName \ back slash DEL Name Decimal Hex Binary Caret Feature Character Codes 251 1111 252 253 254 255 This page intentionally left blank for double-sided printing Configuration Menu Configuration Menu Printer Specifications Hardware SpecificationsInterface Specifications Print Head SpecificationsPrinter Specifications USB Settings Serial Interface SpecificationsThis page intentionally left blank for double-sided printing