Commands
GS US Cancel Inverse Print Mode
Description
Cancels the inverse print mode (white on black) and returns text back to its normal attributes for the remainder of the current line.
See Also
GS RS
Expression
ASCII | GS US |
Decimal | 29 31 |
Hex | 1D 1F |
Parameters
None
GS u Set Characters per Line in Portrait
Description
Creates an internal memory buffer to store portrait text and barcodes. The size of the buffer is determined by n, the number of characters per line. The n parameter is converted internally to millimeters so new line lengths can be automatically calculated in the event a font change takes place. The conversion to millimeters is done by multiplying the value of n by the width of whatever font is currently set when the GS u command is sent.
This command may be used in conjunction with the GS T command to determine where, if at all, text wraps to the next line.
This command is similar to the GS t command.
See Also
GS t
GS T
Expression
ASCII | GS u n |
Decimal | 29 117 n |
Hex | 1D 75 n |
Parameters
n the desired number of characters per line in portrait mode
47