Epson SE450 manual GS DC3 Cancel Double Height, GS d Feed n Text Lines

Page 40

Command Reference

GS DC3

Expression

ASCII	GS DC2
Decimal	29 18
Hex	1D 12
Parameters
None

GS DC3 Cancel Double Height

Description

Cancels the double-height characters and returns the font to normal size. This command must be sent at the beginning of a line, before any printable characters.

See Also

GS DC2

Expression

ASCII	GS DC3
Decimal	29 19
Hex	1D 13
Parameters
None

GS d Feed n Text Lines

Description

Prints the contents of the buffer and feeds n number of text lines. This command has the same effect as line feeds.

See Also
ESC J
Expression
ASCII	GS d n
Decimal	29 100 n
Hex	1D 64 n

Parameters

nthe desired distance (in text lines) to advance the print head

34

Image 40

Contents Technical Reference Copyright Contents Page Character Codes Configuration Menu Printer Specifications This page intentionally left blank for double-sided printing Introduction This page intentionally left blank for double-sided printing Configuring the Host Computer for RS-232 Serial Interface RS-232 SettingsRS-232 Signal Levels RS-232 CablingProgramming Overview Programming the LabelWriter PrinterResetting the Printer Command ParametersCharacter Evaluation Bit Character ParametersConversions Objects Font SpecificationsPrint Modes Raster Mode OrientationLandscape Mode Text ObjectsBarcode Objects Graphic Objects Line ObjectsCommand Reference Alphabetical Command ListESC L Commands by Function Position ControlFont Control GS DC2 GS DC3 GS RS GS USMiscellaneous BarcodesPrintable Characters Raster Compatibility Commands20h FFh Printable Characters DC4 Cancel Double Wide Mode CR Carriage ReturnESC a Return Hardware Status ESC a Return Printer StatusESC B Set Dot Tab ESC d Set Print Temperature to Medium ESC c Set Print Temperature to LowESC D Set Bytes per Line ESC e Set Print Temperature to Default ESC E Form FeedESC g Set Print Temperature to High ESC F 1 n Feed n LinesESC h Set Print Speed to Fast ESC i Set Printing Speed to BarcodeESC L Set Feed Length ESC M Set Font to 12 cpiESC P Set Font to 16 cpi ESC S Set Font to 20 cpi ESC Q Set Top MarginESC T Set Font to 7 cpi ESC U Set Font to 10 cpi ESC V Return Firmware Revision ESC W Wrap DataESC X Set Horizontal Starting Position ESC Y Set Vertical Starting PositionESC * Reset to Defaults ESC @ Reset to Power-up ConditionESC y Set 203 x 203 dpi ESC z Set 136 x 203 dpiETB Raster Mode Compressed Graphics FF Form Feed GS a Starting Position of Bar Code GS DC2 Set Font to Double HeightGS DC3 Cancel Double Height GS d Feed n Text LinesGS h Set Barcode Height GS k Print BarcodeData Matrix Barcode UPC-ASupported Square Data Matrix Symbol Sizes Supported Rectangular Data Matrix Symbol Sizes Commands Command Reference GS l Draw Line in Landscape Mode Least significant byte of the line length in dots GS L Set Feed Length GS RS Set Inverse Print Mode GS q Print UPC/EAN ChecksumGS S Return Printer Status ReturnsGS T Select Line Wrap/Truncate Modes GS t Set Characters per Line in LandscapeGS US Cancel Inverse Print Mode GS u Set Characters per Line in PortraitGS V Set Print Orientation GS W Set Bar Code Element WidthGS ~ Enter Debug Mode GS w Set Barcode Module WidthGS * Landscape Mode Graphics HT Horizontal Tab SO Set Font to Double Wide ModeLF Line Feed SYN Raster Mode Graphics Activating the Caret Feature Caret FeatureUsing the Caret Feature Command Reference Character Codes CharCharacter Codes CharName \ back slash DEL Name Decimal Hex Binary Caret Feature Character Codes 251 1111 252 253 254 255 This page intentionally left blank for double-sided printing Configuration Menu Configuration Menu Printer Specifications Hardware SpecificationsInterface Specifications Print Head SpecificationsPrinter Specifications USB Settings Serial Interface SpecificationsThis page intentionally left blank for double-sided printing