Epson SE450 manual ESC y Set 203 x 203 dpi, ESC z Set 136 x 203 dpi, ESC * Reset to Defaults

Page 36

Command Reference

This command is used in landscape printing to set a new offset from the top margin from which to begin printing text and barcode objects. Distance is specified in millimeters. The LabelWriter SE450 print head is 56 millimeters wide.

Expression

ASCII	ESC Y n
Decimal	27 89 n
Hex	1B 59 n

Parameters

nthe offset distance in millimeters

ESC y Set 203 x 203 dpi

Description

Provided for LabelWriter raster compatibility.

ESC z Set 136 x 203 dpi

Description

Provided for LabelWriter raster compatibility.

ESC * Reset to Defaults

Description

Returns the printer to its power-up condition, clears all buffers, and resets all character attributes. The ESC * command is the same as the ESC @ command.

See Also

ESC @

Expression

ASCII	ESC *
Decimal	ESC 42
Hex	ESC 2A

Parameters

None

ESC @ Reset to Power-up Condition

Description

Returns the printer to its power-up condition, clears all buffers, and resets all character attributes. The ESC @ command is the same as the ESC * command.

30

Image 36

Contents Technical Reference Copyright Contents Page Character Codes Configuration Menu Printer Specifications This page intentionally left blank for double-sided printing Introduction This page intentionally left blank for double-sided printing Configuring the Host Computer for RS-232 Serial Interface RS-232 SettingsRS-232 Signal Levels RS-232 CablingProgramming Overview Programming the LabelWriter PrinterResetting the Printer Command ParametersCharacter Evaluation Bit Character ParametersConversions Font Specifications ObjectsPrint Modes Raster Mode OrientationLandscape Mode Text ObjectsBarcode Objects Graphic Objects Line ObjectsCommand Reference Alphabetical Command ListESC L Commands by Function Position ControlFont Control GS DC2 GS DC3 GS RS GS USBarcodes MiscellaneousPrintable Characters Commands Raster Compatibility20h FFh Printable Characters DC4 Cancel Double Wide Mode CR Carriage ReturnESC a Return Printer Status ESC a Return Hardware StatusESC B Set Dot Tab ESC c Set Print Temperature to Low ESC d Set Print Temperature to MediumESC D Set Bytes per Line ESC e Set Print Temperature to Default ESC E Form FeedESC g Set Print Temperature to High ESC F 1 n Feed n LinesESC h Set Print Speed to Fast ESC i Set Printing Speed to BarcodeESC L Set Feed Length ESC M Set Font to 12 cpiESC P Set Font to 16 cpi ESC Q Set Top Margin ESC S Set Font to 20 cpiESC T Set Font to 7 cpi ESC U Set Font to 10 cpi ESC V Return Firmware Revision ESC W Wrap DataESC X Set Horizontal Starting Position ESC Y Set Vertical Starting PositionESC * Reset to Defaults ESC @ Reset to Power-up ConditionESC y Set 203 x 203 dpi ESC z Set 136 x 203 dpiETB Raster Mode Compressed Graphics FF Form Feed GS a Starting Position of Bar Code GS DC2 Set Font to Double HeightGS DC3 Cancel Double Height GS d Feed n Text LinesGS h Set Barcode Height GS k Print BarcodeData Matrix Barcode UPC-ASupported Square Data Matrix Symbol Sizes Supported Rectangular Data Matrix Symbol Sizes Commands Command Reference GS l Draw Line in Landscape Mode Least significant byte of the line length in dots GS L Set Feed Length GS RS Set Inverse Print Mode GS q Print UPC/EAN ChecksumGS S Return Printer Status ReturnsGS T Select Line Wrap/Truncate Modes GS t Set Characters per Line in LandscapeGS US Cancel Inverse Print Mode GS u Set Characters per Line in PortraitGS V Set Print Orientation GS W Set Bar Code Element WidthGS ~ Enter Debug Mode GS w Set Barcode Module WidthGS * Landscape Mode Graphics SO Set Font to Double Wide Mode HT Horizontal TabLF Line Feed SYN Raster Mode Graphics Caret Feature Activating the Caret FeatureUsing the Caret Feature Command Reference Character Codes CharCharacter Codes CharName \ back slash DEL Name Decimal Hex Binary Caret Feature Character Codes 251 1111 252 253 254 255 This page intentionally left blank for double-sided printing Configuration Menu Configuration Menu Printer Specifications Hardware SpecificationsInterface Specifications Print Head SpecificationsPrinter Specifications USB Settings Serial Interface SpecificationsThis page intentionally left blank for double-sided printing