Nortel Networks R2MFC manual MFC directory CLI commands Sheet 2

		Chapter 7 Command Line Interface (CLI) 85
Table 25 MFC directory CLI commands (Sheet 2 of 3)
CLI command	Description
CatgOpt <mfc_link> <flag>	Defines which MFC category to transmit in outgoing calls.
	Where:
	mfc_link is the number of the link, 0 or 1.
	flag defines the MFC category (default is 0).
DefltCatgVal <mfc_link><category>	Defines the MFC category value when CatgOpt is set to the default value.
	Where:
	mfc_link is the number of the link, 0 or 1.
	category is the MFC category in the range of 1...15.
SubsIndOpt <mfc_link> <flag>	Defines which subscriber status to send when an incoming MFC call
	terminates successfully.
	Where:
	mfc_link is the number of the link, 0 or 1.
	flag is the subscriber status, 0 (subscriber option is default value) or 1
	(subscriber option is received value).
DefltSubsVal	Defines the subscriber status value when the SubsIndOpt commands is set
<mfc_link><subscriber>	to the default value.
	Where:
	mfc_link is the number of the link, 0 or 1.
	subscriber can have the values of:
	• 0 = speech_charge (A group)
	•	1 = free_charge
	•	2 = free_no_charge
	•	3 = control_charge
EndDialType	Defines how to handle MFC end of dial.
<mfc_link><direction><type>
	Where:
	mfc_link is the number of the link, 0 or 1.
	direction is 0 (IC), 1 (OG), or 2 (both).
	type is either 0 (Ix signal) or 1 (fix number of digits).
SetDigitCount <mfc_link>	Sets the number of expected digits when the EndDialType is set to a fixed
<count_type> <value>	number of digits.
	Where:
	mfc_link is the number of the link, 0 or 1.
	count_type is either 0 (minimal range) or 1 (optional range).
	value has values of 3...12 for minimal range or 0...15 for optional range.

R2MFC Media Bay Module Installation and Configuration Guide