Transcend Information SSD25S Security set Password data content, Security SET Password F1h

TS8GSSD25S-S
TS16GSSD25S-S/M
TS32GSSD25S-S/M
TS64GSSD25S-S/M
TS128GSSD25S-M	2.5” Solid State Disk
TS192GSSD25S-M

result in the Aborted Command error:

•SECURITY SET PASSWORD

•SECURITY UNLOCK

•SECURITY DISABLE PASSWORD

•SECURITY ERASE PREPARE

•SECURITY ERASE UNIT

The drive exits from Frozen mode upon a power-off or hard reset. If the SECURITY FREEZE LOCK command is issued when the drive is placed in Frozen mode, the drive executes the command, staying in Frozen mode.

SECURITY SET PASSWORD (F1h)

This command set user password or master password. The host outputs sector data with PIO data-out protocol to indicate the information defined in the following table.

Security set Password data content

Word		Content
0	Control word
	Bit 0	Identifier	0=set user password
			1=set master password
	Bits 1-7	Reserved
	Bit 8	Security level	0=High
			1=Maximum
	Bits 9-15	Reserved
1-16	Password (32 bytes)
17-255	Reserved

SECURITY UNLOCK (F2h)

This command disable LOCKED MODE of the device. This command transfers 512 bytes of data from the host with PIO data-out protocol. The following table defines the content of this information.

		Security Unlock information
	Word		Content
	0	Control word
Transcend Information Inc.			29

V1.08