Transcend Information TS128GSSD25S-M, TS64GSSD25S-M Sata Interface, Out of bank signaling

Page 9

TS8GSSD25S-S
TS16GSSD25S-S/M
TS32GSSD25S-S/M
TS64GSSD25S-S/M
TS128GSSD25S-M	2.5” Solid State Disk
TS192GSSD25S-M	2.5” Solid State Disk

SATA Interface

Out of bank signaling

There shall be three Out Of Band (OOB) signals used/detected by the Phy: COMRESET, COMINIT, and COMWAKE. COMINIT, COMRESET and COMWAKE OOB signaling shall be achieved by transmission of either a burst of four Gen1 ALIGNP primitives or a burst composed of four Gen1 Dwords with each Dword composed of four D24.3 characters, each burst having a duration of 160 UIOOB. Each burst is followed by idle periods (at common-mode levels), having durations as depicted in Figure 4 and Table 2.

Figure 4 : OOB signals

Table 2 : OOB signal times

Transcend Information Inc.

9

V1.08

Image 9

Contents Dimensions Placement FeaturesDescription V1.08Specifications Model P/N Sequential ReadMax Sequential WriteMaxModel P/N User Max. LBA Cylinder Head Sector Data Reliability Data Retention Operating Non-OperatingCompliance Package Dimensions Pin Assignments Pin LayoutPin No Pin Name Block Diagram Wear-Leveling algorithm ReliabilityECC algorithm Bad-block managementSata Interface Out of bank signalingComreset TS192GSSD25S-M Cominit TS192GSSD25S-M Power on sequence Power on sequence timing diagramATA command register Command Name Code Command TableSET Features ATA Command Specifications Word Value Description Identify Device Information Default ValuePIO data transfer cycle timing mode Reserved TS192GSSD25S-M Minor version number TS192GSSD25S-M TS192GSSD25S-M Current AAM value 15-8 Vendor’s recommended AAM value 95-99 Idle Immediate E1h Idle E3hInitialize Device Parameters 91h Read Buffer E4hRead DMA EXT 25h Log Address Log Name Feature Set AccessRead Fpdma Queued 60h Read LOG EXT 2FhRead Verify Sectors 40h/41h Security Disable Password F6hRead Verify Sectors EXT 42h Recalibrate 10hSecurity set Password data content Security SET Password F1hSecurity Unlock F2h Features register Value and settable operating mode Smart Function Set B0h Code Smart SubcommandByte Description Byte 2-361 Individual attribute dataDescription Detail Information Byte Attribute ID information is listed in the following tableSmart Read Attribute Threshold Smart Enabl Operations Standby Immediate E0h Standby E2hWrite Buffer E8h Write DMA CAhWrite Multiple FUA EXT CEh Write Multiple EXT 39hWrite Sectors 30h/31h Write Sectors EXT 34hTaiwan Germany Ordering Information