Transcend Information TS16GSSD25S-M Data Reliability Data Retention, Operating Non-Operating

Page 4

TS8GSSD25S-S
TS16GSSD25S-S/M
TS32GSSD25S-S/M
TS64GSSD25S-S/M
TS128GSSD25S-M	2.5” Solid State Disk
TS192GSSD25S-M	2.5” Solid State Disk

Reliability

Data Reliability

Data Retention

MTBF

Supports BCH ECC 8 bits in 512 bytes

10years 1,000,000 hours

Vibration

Operating

Non-Operating

3.0G, 5 - 800Hz

3.0G, 5 - 800Hz

*Note: Reference to the IEC 60068-2-6 Testing procedures; Operating-Sine wave, 5-800Hz/1 oct., 1.5mm, 3g, 0.5 hr./axis, total 1.5 hrs.

Shock

Operating

Non-Operating

1500G, 0.5ms

1500G, 0.5ms

*Note: Reference to the IEC 60068-2-27 Testing procedures; Operating-Half-sine wave, 1500g, 0.5ms, 3 times/dir., total 18 times.

Regulations

Compliance

CE, FCC and BSMI

Transcend Information Inc.

4

V1.08

Image 4

Contents Placement Features DimensionsDescription V1.08Specifications Sequential WriteMax Model P/N Sequential ReadMaxModel P/N User Max. LBA Cylinder Head Sector Operating Non-Operating Data Reliability Data RetentionCompliance Package Dimensions Pin Layout Pin AssignmentsPin No Pin Name Block Diagram Reliability Wear-Leveling algorithmECC algorithm Bad-block managementOut of bank signaling Sata InterfaceComreset TS192GSSD25S-M Cominit TS192GSSD25S-M Power on sequence timing diagram Power on sequenceATA command register Command Table Command Name CodeSET Features ATA Command Specifications Identify Device Information Default Value Word Value DescriptionPIO data transfer cycle timing mode Reserved TS192GSSD25S-M Minor version number TS192GSSD25S-M TS192GSSD25S-M Current AAM value 15-8 Vendor’s recommended AAM value 95-99 Idle E3h Idle Immediate E1hInitialize Device Parameters 91h Read Buffer E4hLog Address Log Name Feature Set Access Read DMA EXT 25hRead Fpdma Queued 60h Read LOG EXT 2FhSecurity Disable Password F6h Read Verify Sectors 40h/41hRead Verify Sectors EXT 42h Recalibrate 10hSecurity SET Password F1h Security set Password data contentSecurity Unlock F2h Features register Value and settable operating mode Code Smart Subcommand Smart Function Set B0hByte 2-361 Individual attribute data Byte DescriptionAttribute ID information is listed in the following table Description Detail Information ByteSmart Read Attribute Threshold Smart Enabl Operations Standby E2h Standby Immediate E0hWrite Buffer E8h Write DMA CAhWrite Multiple EXT 39h Write Multiple FUA EXT CEhWrite Sectors 30h/31h Write Sectors EXT 34hOrdering Information Taiwan Germany